7
FOR KEY OPERATORS
The following key operator programs can be used when the optional 20-bin sorter is installed.
To enter the key operator programs, see "Using the key operator programs" on page 3 of the Key Operator's Guide.
■
■
■
■
Additional programs
All of the additional programs are enabled by touching the checkbox (
) to make a checkmark appear (
).
(See "Supplementary explanation of key operation for key operator programs" on page 3 of the Key operator's
guide.)
DISABLING OF SORTER
This program is used to disable use of the 20-bin sorter when it malfunctions.
When disabled, copies cannot be output to the 20-bin sorter.
This program can be selected in the Device control category of general key operator programs. (See page 9 of
the Key operator's guide.)
OVERRIDE SORTER BIN CAPACITY LIMIT
When the 20-bin sorter is installed and copying is performed in sort mode or group mode, copying normally stops
automatically if the capacity limit of each bin is reached.
This program allows you to override the capacity limit and allow copying to continue. Caution should be exercised
when enabling this program, as misfeeds, a machine failure, or copies overflowing from bins may result.
This program can be selected in the Copy settings (Other function settings) category of programs for copy mode.
(See page 13 of the Key operator's guide.)
AR̲S11̲07.fm 7 ページ ２００３年２月２４日 月曜日 午後２時４１分
