6
MISFEED IN THE 20-BIN SORTER
When a misfeed has occurred during copying, the message "MISFEED HAS OCCURRED." will appear in the touch
panel display of the operation panel and copying output will stop.
1
Push the sorter release button and slide
the sorter carefully along the guides away
from the machine.
2
Remove the misfed paper.
Remove the misfed
paper from the sorter.
Remove the misfed
paper from the exit area
of the machine.
If you removed misfed
paper from the machine,
perform a "Reset after
misfeed in machine" as
explained at right before
proceeding to step 3.
3
Slide the sorter back toward the machine
and latch it into place.
Confirm that the misfeed
display is cleared.
If the message
indicating a misfeed is
still displayed, check the
inside of the machine
and remove any
remaining misfed paper.
NOTE
Touch the [INFORMATION] key for more detailed information as necessary.
Reset after misfeed in machine
If you removed misfed paper from the machine
in step 2, reset the machine as explained below.
If this is not done, it may not be possible to clear
the misfeed display.
1
Open the duplex bypass/inverter
unit.
Grasp the finger
hold and gently
open the unit.
2
Gently close the duplex bypass/
inverter unit.
AR-S11_ex.book 6
ページ
２００２年１２月１７日 火曜日 午後７時４７分
