Sharp AR-PK6, Руководство по установке программного обеспечения

Страница: 6 / 16

REQUIREMENTS FOR MACINTOSH
4
Installing the PPD file
In order to print from a Macintosh, the PPD file must be installed. To install the PPD file in your Macintosh computer,
follow the procedure below.
■ ■ ■ ■
Installation in Mac OS X
1
Insert the PS3 Expansion Kit AR-
PK6 Software CD-ROM into your
computer's CD-ROM drive.
2
Double-click the CD-ROM icon on
the desktop.
3
Double-click the [MacOSX] folder.
4
Double-click the folder of the
operating system version you are
using.
●
In Mac OS X v10.1.5, double-click the [Version
10.1] folder.
●
In Mac OS X v10.2 to 10.2.8 (excluding 10.2.2),
double-click the [Version 10.2] folder.
●
In Mac OS X v10.3 to 10.3.3, double-click the
[Version 10.3] folder.
5
Double-click the [AR-PK6] icon.
The installer window will appear.
6
Click the [Continue] button.
7
The Software License Agreement
window will appear. Make sure that
you understand the contents of the
license agreement, and then click
the [Continue] button.
A message will appear asking you if you agree to
the terms of the license. Click the [Agree] button.
8
Select the hard disk in which you
wish to install the PPD file, and
click the [Continue] button.
Be sure to select the hard disk in which your
operating system is installed.
9
Click the [Install] button.
Begin installation of the PPD file.
10
When the message "The software
was successfully installed"
appears in the installation window,
click the [Close] button.
This completes the installation of the PPD file.
NOTE
When the "Authenticate" window appears, enter the
password and click the "OK" button.
inst_us.fm 4 ページ ２００４年９月３日 金曜日 午前１１時５５分