Sharp AR-M550U, Техническое руководство, Страница: 30 / 48

TEST SIMULATIONS
30
February 2005
Test
Command
Sub
Code
Description
38 Used to set continue/stop when developer life is reached.
41 Used to disable/enable auto magnification in pamphlet
mode.
50 Used to set up black and white reverse.
52 Used to set whether non-print paper is counted or not.
26
68 Enable or disable of the CA key.
01 Used to set communications between host and modem.
27
05 Sets machine tag number.
01 Main unit sensors check.
30
02 Paper feed tray sensors check.
01 Manual feed tray size sensor check.
02 Manual feed tray width sensor check tray.
07 Manual feed tray width adjustment setting.
11 Multi-purpose tray width check.
40
12 Multi-purpose tray width detection adjustment.
01 Document size sensor check.
02 Document size adjustment set up.
41
03 Document size set up display.
43 01
Fuser temperature set up.
01
Enable/disable correction operations in the image
process section.
02
Used to perform gain adjustment of the image density
sensor and drum mark sensor.
04 Used to set the target density level.
05
Used to set the reference developing bias, main grid
voltage and laser power.
09 Process control data display.
12
Used to display sapling toner image patch density
correction.
14
Used to check the output level of the temperature and
humidity sensors.
44
16 Used to check the toner concentration control data.
02 Adjust copy density in all copy modes.
09 Adjust print density in copy/text mode.
10 Adjust print density in copy/text/photo mode.
11 Adjust print density in copy/photo mode.
12 Adjust print density in fax mode (all modes).
13 Adjust print density in fax mode (normal).
14 Adjust print density in fax mode (fine text).
15 Adjust print density in fax mode (super-fine text).
16 Adjust print density in fax mode (ultra-fine).
17 Adjust gain in shading correction.
18 Adjust gamma density gradient in copy/fax mode.
46
19 Adjust gamma in auto copy/scan and fax mode.