Sharp AR-LC1 Скачать руководство пользователя | Manualshive

Страница: 4 / 30

background image

2. Mount the connecting plate to the large capacity tray.

Note: Before mounting the connecting plate to the large capacity

tray, be sure to remove the 2 step screws for securing the
bottom plate.

Fit the connecting plate to the lower part of the large capacity tray
and mount the plate to the position indicated with A using screw B.

3. Fit the connecting plate of the large capacity tray to

the mounting plate of the stand.

Insert the connecting plate into the mounting plate of the stand while
lifting the large capacity tray a little.

After insertion, move the large capacity tray away from the copier to
check that the tray is locked.While the tray is locked, mount the
securing plate using 2 screws C.

4. Check and adjust the height of the large capacity tray.

Move the large capacity tray toward the copier and adjust the tray
and check it so that the rib of the large capacity tray is flush with the
axis of the mounting plate which has been mounted to the copier as
shown in the figure.

•

If the axis is flush with the rib:

Push the large capacity tray toward the copier.

•

If the axis is not flush with the rib:

Loosen the 2 screws of the installation adjuster mounting plate lo-
cated at the lower part of the large capacity tray and adjust as fol-
lows:

★

If the rib is to the right of the axis

Turn the knob clockwise to adjust.

After adjustment, tighten the 2 screws of the installation adjuster
mounting plate.

★

If the rib is to the left of the axis

Turn the knob counterclockwise to adjust.

After adjustment, tighten the 2 screws of the installation adjuster
mounting plate.

‚`

‚a

‚`

‚a

Screw B

Step screws

Connecting plate

1

2

Mounting plate

Connecting plate

Securing plate

Screws C

Top view

Axis

Rib

Top view

Axis

Rib

Knob

Screw

Top view

Axis

Rib

Knob

Screw

3 – 2

«
...
2
3
4
5
6
...
»

Содержание AR-LC1































Отзывы:

Нет отзывов

Похожие инструкции для AR-LC1

Бренд: Sitecom Страницы: 9

imageRUNNER 2545i

Бренд: Canon Страницы: 114

Бренд: Xerox Страницы: 8

Бренд: Canon Страницы: 174

Бренд: Panasonic Страницы: 194

Бренд: HP Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды