A LOOK AT THE OPERATION PANEL
1-4
FAX MODE (CONDITION SETTINGS SCREEN)
The condition settings screen of fax mode is displayed by pressing the [IMAGE SEND] key while the print mode, copy
mode, or job status screen appears in the touch panel. In the explanations that follow, it is assumed that the initial
screen that appears after pressing the [IMAGE SEND] key is the condition settings screen (shown below). If you have
set the display to show the address directory screen (next page) when the [IMAGE SEND] key is pressed, touch the
[CONDITION SETTINGS] key in the address directory screen to display the condition settings screen.
"Default display settings" (page 8-4) in the key operator programs can be used to select whether the condition
settings screen (below) appears or the address directory screen (next page) appears as the initial screen when the
[IMAGE SEND] key is pressed.
* When the network scanner option is installed, you will return to the initial screen of fax mode or scanner mode,
whichever mode was selected last. (Pressing the [IMAGE SEND] key in a copy screen or printer screen returns
you to the initial screen of fax mode.)
■
■
■
■
Condition settings screen
The display is initially set (factory setting) to show the following condition settings screen as the initial screen.
Message display
Messages appear here to indicate the current
status of the machine. The icon at left (
)
indicates fax mode.
Memory and reception mode display
This shows the amount of fax memory that is free
and the currently selected reception mode.
[SPEAKER] key (page 1-11)
Touch the [SPEAKER] key to dial and transmit a
fax manually.
During dialing it changes into the [PAUSE] key, and
after touching the [SUB ADDRESS] key it changes
into the [SPACE] key.
[REDIAL] key (page 1-11)
Touch this key to redial the number most recently
dialed with the numeric keys or a one-touch key.
After dialing, this key changes into the [NEXT
ADDRESS] key.
[ADDRESS DIRECTORY] key (page 2-3)
Touch this key to display the address directory
screen (next page). Touch this key when you want
to use an auto-dial number (one-touch dialing or
group dialing).
[SUB ADDRESS] key (page 4-3)
Touch this key to enter a sub-address and
passcode when using F-code transmission.
[ADDRESS REVIEW] key (page 3-3)
When performing a broadcast transmission, touch
this key to check your selected destinations. The
selected destinations will appear and any
unneeded destinations can be deleted.
[SCANNER/FAX] key
This key appears when the network scanner option
is installed. Touch the key to switch between the
scanner screen and the fax screen. When the fax
screen appears, "FAX" is highlighted. When the
scanner screen appears, "SCANNER" is
highlighted.
[SPECIAL MODES] key
Touch this key to set one of the following special
functions:
• Timer transmission (page 3-4)
• Polling (page 3-6)
• Dual page scan (page 3-10)
• Program (page 3-11)
• Memory box (page 3-7)
Two-sided original icon display (page 2-4)
Icons appear here when you touch the [ORIGINAL]
key and select two-sided scanning. The icons can
be touched to open function selection screens.
ADDRESS
DIRECTORY
AUTO
READY TO SEND.
ORIGINAL
STANDARD
RESOLUTION
AUTO
EXPOSURE
SUB ADDRESS
ADDRESS REVIEW
SPECIAL MODES
REDIAL
SPEAKER
FAX MEMORY:100%
AUTO RECEPTION
SCANNER
FAX
1
2
3
4
5
6
7
8
9
10
11
12
13
14
1
2
3
4
5
6
7
8
9
10
WhaleII_fax_ex.book 4
ページ
２００４年９月２１日 火曜日 午後１時９分
