Sharp AR-D27 Скачать руководство пользователя

Страница: 5 / 84

AR-D28/D27/MU2

UNPACKING AND INSTALLATION

4 – 1

[4] UNPACKING AND INSTALLATION

1. AR-D28

<Before installation>

• Start installation after checking that the DATA and COMMUNICA-

TION indicators on the operation panel are neither lit nor blinking.

1) Turn off the main switch of the main unit of the printer.

Turn the main switch located on the front side of the printer to the
"OFF" position.
Then remove the power plug from the outlet.

2) Attach the adjusters and adjust them.

<1>Insert the left adjusters to the stand/paper drawer.
<2>Turn the each adjusters to lower them until they touch the floor.

Be sure to attach the left adjuster to prevent overturning.

Caution: The lower tray cannot be pulled out unless the adjuster is low-

ered to the specified position.

3) Put the main unit of the printer on the stand/paper drawer.

<1>Pull out the paper tray of the main unit until it stops and then

remove it by lifting both ends of the tray.

<2>Hold the main unit of the printer at the positions shown in the illus-

tration and put the main unit on the stand/paper drawer so that the
front side and the left side of the main unit are aligned to those of
the stand/paper drawer.

Caution: For installation of the main unit, it must be held by two persons

and installed without haste.

4) Connect the main unit to the stand/paper drawer.

<1>Attach the rear mounting plates using a supplied screw for each.

Caution: Insert the rear mounting plates under the desk frame.

<2>Pull out the upper paper tray of the stand/paper drawer until it stops

and attach the front mounting plates using a supplied screw for each.
Then, remove the lock of the paper tray and close the tray.

<Parts

included>

Left

adjuster:

pc.

Front

mounting

plates:

pcs.

Rear

mounting

plates:

pcs.

Screws

(M4x6):

pcs.

Left

paper

guides:

pcs.

Right

paper

guides:

pcs.

"OFF"

Front

side

Rear

side

Rear mounting plate

Screw

Desk frame

Rear
mounting plate

Screw

Front
mounting plate

Front mounting
plate

Содержание AR-D27





















































































Результаты поиска

Содержание AR-D27

Отзывы:

Похожие инструкции для AR-D27

Бренды по названию

Популярные бренды

Sharp AR-D27, Руководство по обслуживанию

Результаты поиска

Содержание AR-D27

Отзывы:

Похожие инструкции для AR-D27

Бренды по названию

Популярные бренды