Sharp AR-C260, Руководство по эксплуатации

Страница: 121 / 140

JOB PROGRAM MEMORY
6-27
6
Recalling a job program
1
Press the [#/P] key.
2
Touch the desired storage register
number key to recall the job from memory.
When a number key is
touched, the selection
screen will be closed
and the stored job
program will be recalled.
A number for which no
job program has been
stored cannot be
selected.
3
Set the number of copies as needed and
press the [COLOR COPY START (
)]
or [BLACK COPY START ( )] key.
Copying will start with
the settings of the
recalled job program.
Deleting a stored job program
1 Press the [#/P] key.
2 Touch the [STORE/DELETE] key to obtain
the storage register screen.
3
Select a storage register number of the
program to be deleted.
If a number key for which
no job program has
been stored is selected,
the screen will change to
the screen of step 4 on
the previous page (for
storing a job program).
4 Touch the [DELETE] key.
When the [DELETE] key
is touched, the screen in
step 3 will return and the
program will be deleted.
If the [CANCEL] key is
touched, the screen in
step 3 will return but the
program will not be
deleted. If no other
programs are to be
deleted, touch the [EXIT]
key on the screen
displayed in step 3 to
exit the job program
mode.
JOB PROGRAMS
PRESS PROGRAM NUMBER.
RECALL
M NUMBER.
RECALL STORE/DELETE
EXIT
STORE/DELETE
NOTE
If overwriting of programmed copy settings has been
prohibited in the key operator programs, you will not
be able to clear a job program. (See page 15 of the
key operator's guide.)
REC LL STORE/DELETE
A JOB PROGRAM HAS BEEN ALREADY STORED.
STORE ANOTHER PROGRAM?
CANCEL DELETE STORE
00-08.book 27 ページ ２００２年１１月８日 金曜日 午前９時３９分