manualshive.com logo in svg

Sharp AR-505, Руководство по эксплуатации

Поделиться
Скачать
Sharp AR-505 Скачать руководство пользователя страница 64

3-30

CHAPTER

3

These functions are selected by pressing the “TEXT
STAMP” key on the SPECIAL MODES screen and then
selecting from the “TEXT STAMP” menu.

●

These functions will not work when non-standard size
paper is used.

●

Multiple text stamp functions can be selected at the
same time except for SELECT STAMP and
WATERMARK. These functions cannot be selected
together.

●

Depending upon the original image type, the watermark
may obscure some of the copied image or vice versa.

●

The size of printed characters is fixed.
The size will not vary even in reduction or enlargement
copying.

TEXT STAMP

The text stamp functions include the following functions.

●

Date: Adds the current date to the copies.

●

Select stamp: Adds a selected stamp to the copies.
The stamp will be printed in white on a shaded
background.

●

Watermark: Adds a selected watermark to the copies.
The watermark will be printed in gray tone.

●

Page number: Adds page numbers to the copies.

The DATE function adds the current date to the copies. The date will be
printed at the upper right of the copies.

●

If reduction or enlargement is used with this function, the print
position may move or the date may not be printed.

★

KEY OPERATOR To use the DATE function, set the current date and
time. See page 8-21. The initial setting of the date format can be changed.
See page 8-20.

1

Place the originals in the document feeder tray or on the
document glass.

2

Press the SPECIAL MODES key.

●

The SPECIAL MODES screen will appear.

DATE

READY TO CO

SPECIAL FUNCTIONS

  Text stamp

July 23, 1999

Содержание AR-505















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды