Sharp AR 168D - Digital Imager B/W Laser Скачать руководство пользователя страница 22

Страница: 22 / 116

Chapter 3

This chapter explains basic copying functions.

NORMAL COPYING

Using the document glass

Open the SPF/RSPF, and place the original face down on the
document glass.
[How to place the original]

Align the original with the original scale and the
centering (

) mark.

Gently close the SPF/RSPF.

Select the number of copies and other copy settings, and then
press the [START] key (

Copying books or originals with folds or creases

Press down on the SPF/RSPF while copying as
shown. If the SPF/RSPF is not completely closed,
shadows may appear on the copy or it may be fuzzy.
Straight originals with folds or creases well before
placing.

• The document glass can scan up to 8-1/2" x 14" original.
• When a copy is made, the edges will not be copied (image loss). For

the image loss, see the "SPECIFICATIONS" (p.92).

• To stop copying in the middle of a run, press the [CLEAR] key (

• For the copy settings, see pages 23 through 35.

Note

mark

Original scale

Note

MAKING COPIES

!03-making copies.fm 20

ページ

２００３年１２月１７日　水曜日　午前９時２１分

Содержание AR 168D - Digital Imager B/W Laser





















































































































Результаты поиска

Содержание AR 168D - Digital Imager B/W Laser

Отзывы:

Sharp AR 168D - Digital Imager B/W Laser, Руководство по эксплуатации, Страница: 22 / 116

Результаты поиска

Содержание AR 168D - Digital Imager B/W Laser

Отзывы: