Sharp AR-160, Руководство по обслуживанию

Страница: 39 / 76

Main
code Sub
code
Contents Details of operation
Initial
value
Set range
22 15 Trouble memory display Used to display the actually occurred trouble codes on the display on
the operation panel. When the start key is pressed during the main code
display, the sub code is displayed. Max. 20 recent trouble codes are
stored.
16 Duplex print counter
display
<Only AR-205> Used to display the current duplex print counter value.
∗
1
17 Copy counter display Used to display the current copy counter value.
∗
1
18 Printer counter display
<Only when an option
is installed> Used to display the current printer counter value.
∗
1
19 Electronic sort counter
display <Only when an
option is installed> Used to display the current electronic sort counter value.
∗
1
20 FAX print counter display
<Only when an option
is installed> Used to display the current FAX print counter value.
∗
1
21 Scanner counter display Used to display the current scanner counter value.
24 1 JAM memory, JAM
counter clear Used to clear the JAM memory and the JAM counter.
∗
2
2 Trouble memory clear Used to clear the trouble memory.
∗
2
4 SPF counter clear
<Only when an option
is installed> Used to clear the SPF counter.
∗
2
5 Duplex counter clear
<Only AR-205> Used to clear the duplex counter.
∗
2
6 Paper feed counter clear Used to clear the paper feed counter.
∗
2
7 Drum counter clear Used to clear the drum counter.
∗
2
8 Copy counter clear Used to clear the copy counter.
∗
2
9 Printer counter clear
<Only when an option
is installed> Used to clear the printer counter.
∗
2
10 Electronic sort counter
clear <Only when an
option is installed> Used to clear the electronic sort counter.
∗
2
11 FAX print counter clear
<Only when an option
is installed> Used to clear the FAX print counter.
∗
2
13 Scanner counter clear Used to clear the scanner counter.
∗
2
25 1 Main motor operation
check Execute the simulation with the developer cartridge removed, and the
main motor will rotate for 30 sec. At that time, the cooling motor rotates
at a low speed.
10 Polygon motor operation
check Used to drive the polygon motor for 30 sec.
∗
2: Display after clearing each counter
000 (0.75 sec)
→
Blank (0.35 sec)
→
000 (0.75 sec)
→
Blank (1.0 sec)
→
Repetition
Key operation Display
Sub code display: Start key Histories 1
∼
10: The upper digit of
display “A”
∼
“J” lights up.
Histories 11
∼
20: The upper digit of
display “A”
∼
“J” blinks.
Trouble code history
select: Magnification ratio
display key
●
Display without trouble code
Main code: “– –”
Sub code: “00”
AR-205
7 – 6