3
ec40_e_02.fm
[3/12]
Before using the handset
You cannot make a call and use functions such as packet communication etc. on the phone without inserting a SIM card.
Before inserting or removing the SIM card, turn off the power, position the back facing upwards and remove the battery pack. Hold the phone securely with your both
hands.
Use the Battery Pack SH30 exclusive to the phone.
For attaching or removing the battery pack, turn off the power, position the back facing upwards, and hold the phone securely with your both hands.
/
Inserting SIM card and battery pack
1
Hook your finger into the slot and open the external connector terminal cover
2
Hook your fingertip under the back cover as shown and remove it upward
3
Hook your finger onto the SIM card tab and pull out the tray (
1
)
:
Pull the tray out straight until it stops.
4
Hold the SIM card with the IC (gold) side turned up and set on the tray (
2
)
5
Push the tray all the way in (
3
)
6
Attach the battery pack
:
With the recycle mark side turned up, place the connector terminal of the phone to that of the battery pack and attach the battery pack.
7
Put the back cover onto the phone in the correct direction and press around the back cover securely to attach
:
After attaching the back cover, replace the external connector terminal cover.
Assembly
Slot
Hook fingers onto the
A
area
Notch
IC (gold)
Tray
Tab
Fit the notch of the SIM card to
that of the tray.
With recycle
mark side up
Connector
terminal
ec40_e.book 3 ページ 2011年9月13日 火曜日 午後5時11分