background image

 

74

Using the Internet

H

 

If the Settings on the PC Are Incorrect

The screen as shown below will be displayed. 
Following the instructions on the screen, send e-mail 
again and make all the necessary settings.

Example

H

 

Operational buttons during playback

Buttons

Description

τ

Hold down to go in reverse.

d

Starts playback.

κ

Hold down to fast forward.

H

Playback stops.

F

Sets pauses and still pictures.

λ

Pressing quickly once takes you to the start of the 
chapter currently playing. Each time you press it, 
you move back to the start of the previous chapter.

L

Pressing quickly once takes you to the start of the 
next chapter. Each time you press it, you move 
ahead to the start of the next chapter.

Deactivating the VUDU Function

Press 

MENU

 to display the menu screen.

Press 

c

/

d

 to select "Information", and then press 

ENTER

.

Press 

a

/

b

 to select "Vudu Help", and then press 

ENTER

.

Press 

c

/

d

 to select "Yes", and then press 

ENTER

.

Troubleshooting - VUDU

VUDU cannot be accessed.

If you are able to access other network services (e.g. 
AQUOS Net) from your device, but are not able to 
access VUDU, please contact VUDU Customer Care at 
1-888-554-VUDU (8838).
If you are not able to access any network services 
(e.g. AQUOS Net) from your device, please consult the 
appropriate section of this operation manual or contact 
your device manufacturer for assistance.

The activation e-mail was not obtained.

Check your junk or spam e-mail folders. If you are unable to 
fi nd the activation e-mail in the folders, reconfi rm the e-mail 
address you have entered, and then try your account 
settings again.

If you encounter any other issues during activation, 
refer to the following online resources:

Detailed VUDU Manual: 

Available at 

http://www.VUDU.com/Docs. This introduces you 
to all aspects of the revolutionary VUDU service with 
easy-to-follow instructions.

VUDU FAQ:

 To learn more about VUDU, visit the 

Frequently Asked Questions at 
http://www.vudu.com/support.

VUDU Customer Care:

 When you need to talk live 

with someone, contact VUDU Customer Care at 
1-888-554-VUDU (8838) 7 a.m. to 8 p.m. Pacifi c, 7 
days a week (except holidays).

LC-52̲60LE925UN̲E.indb   74

LC-52̲60LE925UN̲E.indb   74

2010/07/20   18:41:51

2010/07/20   18:41:51

Содержание AQUOS LC-60LE925UN



























































































Отзывы: