Sharp AQUOS LC-60LE810, Инструкция по замене

Страница: 27 / 34

How to Force On the Unit
Before you can reset lamp
errors, you will need to force
on the unit and then enter
the service menu for
troubleshooting
1. Hold “VOL –“, “CHANNEL ^
and press “POWER” once or
until the triangle light is
steady
2. Release buttons and the set
should turn on
3. Follow the steps on the next
slide to enter the Service menu
Note: The backlights may not turn
on.
Please look at the panel with a light
source, i.e flashlight, etc.
26