Sharp AQUOS LC-46LE925E, Руководство по эксплуатации

Страница: 33 / 84

31
Picture
Advanced
This TV provides various advanced functions for
optimising the picture quality.
Go to “Menu” > “Setup” > “Picture” >
“Advanced”.
C.M.S.-hue
This function adjusts the hue of a selected colour using a
six-colour adjustment system.
C.M.S.-saturation
This function increases or decreases the saturation of a
selected colour using a six-colour adjustment system.
C.M.S.-value
This function adjusts the brightness of a selected colour
using a six-colour adjustment system.
Colour temp.
Adjusts the colour temperature to give the best white
image.
Item
High White with bluish tone.
Mid-High
Intermediate tone between “High” and
“Middle”.
Middle Natural tone.
Mid-Low
Intermediate tone between “Middle”
and “Low”.
Low White with reddish tone.
R/G/B Gain (LO),
R/G/B Gain (HI) Adjusts the white balance by changing
the value of each item.
Scanning Backlight 200
“Scanning Backlight 200” technologies provide superior
solutions for digital display picture quality removing
motion blur (“Scan”, “High”, “Low”, “Off”).
NOTE
• This effect is greater on fast moving images.
• These functions will have no effect in the following cases.
1) The type of signal received is a PC signal.
2) An OSD is being displayed.
3) Teletext is activated.
• If images appear blurred, set to “Off”.
Quad pixel plus
Reproduces high-definition images with higher resolution.
Gamma adjustment
Selects the tone difference of the brightness and
darkness of the image according to the type of
programme watched from a maximum of
e
2 to a
minimum of
f
2.
Film mode
Automatically detects a film-based source (originally
encoded at 24 or 25 frames per second, depending on
the vertical frequency), analyses it and then recreates
each still film frame for high-definition picture quality
(“Advanced (High)”, “Advanced (Low)”, “Standard”, “Off”).
NOTE
• You can select “Advanced”, “Standard” and “Off” in 3D mode.
Active contrast
Automatically adjusts the contrast of an image according
to the scene.
DNR
“DNR” produces a clearer image (“Auto”, “High”,
“Middle”, “Low”, “Off”).
NOTE
• This function may not be available depending on the input
signal type.
Monochrome
For viewing a video in black & white.
Range of OPC
The brightness level range of the OPC sensor’s automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to a
maximum of
e
16 and a minimum of
f
16.
NOTE
• This function is available only when the “OPC” setting is set to
“On” or “On:Display”.
• The maximum setting cannot be set to a smaller number than
the minimum setting.
• The minimum setting cannot be set to a bigger number than
the maximum setting.
• The maximum and minimum settings cannot be set to the
same number.
• Depending on the brightness of the surrounding light, the OPC
sensor might not operate if the adjustment range is small.
Basic adjustment
LC-46LE925E̲GB̲ver4.indd 31 LC-46LE925E̲GB̲ver4.indd 31 2010/08/07 10:58:31 2010/08/07 10:58:31