21
LC-37D40U
LC-45D40U
7
Shut off the AC power to the unit (unplug the AC cord), and remove the SD card for version upgrade.
8
Now the software version upgrade is complete.
Note: When you are done with the software version upgrade, start the set, go to the top page of the adjustment
process screen and check the main software version information.
2-3 Monitor microprocessor software version upgrade
Get ready before you begin
Get ready the same items as listed in the "Main software version upgrade".
Preparation
Create the SD card for monitor microprocessor software version upgrade in the same manner as explained in
the "Main software version upgrade". Copy the binary image file M150Mxxx.SDC (named temporarily) for
monitor microprocessor software version upgrade to the SD card drive.
How to upgrade the software
1
Shut off the AC power to the unit (i.e. unplug the AC cord).
2
Insert the SD card for version upgrade (prepared as above) into the service socket located lower side from
center at terminals, above S-VIDEO terminal in the rear of the unit, in a way that the cut corner of the SD
card comes at the upper side.
Note: If the SD card is inserted in a wrong way, the card will go deep inside the unit beyond retrieval. Take due
care to insert the SD card correctly.
3
Turn on the AC power (i.e. plug in the AC cord).
Caution!!
The moment this operation is done, the upgrading of the monitor microprocessor software starts.
While the upgrade is ongoing, never power off the unit. Otherwise the upgrade will fail and the
system may have a serious damage beyond recovery (inability to start).
4
After the unit startup, the system upgrade screen as shown below appears within 10-30 seconds.
5
A failure in the process will trigger the upgrade failure screen. The word "NG" changes to red for the item
failed.
Note: In the event of a failure, repeat the upgrading process. If the process repeatedly fails, it is likely that the
hardware is troubled.
6
Upon completion of the whole process,the upgrade success screen as shown below appears.You can
check the new software version on this screen. The version information appears after the upgrade is
complete.
MONITOR UPGRADE
Program
NG
12%
1.00
OLD Version
NEW Version
1.02
M150
Содержание Aquos LC 45D40U
