Sharp AQUOS LC-42LE40E, Руководство по обслуживанию

Страница: 9 / 157

LC-32LE40E-LC-42LE40E
9
Preparation
Installing Batteries in the Remote Control Unit
1 Insert two AAA batteries into remote control. Make sure the (k) and (l) ends are facing correct direction.
2 Replace the cover.
NOTE
• If you are not going to use the remote control for a long time, remove the batteries to avoid damaging remote control caused by chemical leakage.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below:
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any chemical leakage, wipe thoroughly
with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
Note on disposing batteries:
The batteries provided contain no harmful materials such as cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household rubbish. Deposit any used batteries free of
charge into the designated collection containers set up at commercial businesses.
Using the Remote Control Unit
Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote control unit and sensor may block proper
operation.