Sharp AQUOS LC-42LE40E Скачать руководство пользователя

Страница: 57 / 157

LC-32LE40E-LC-42LE40E

– Stereo Headphone/Stereo Line Drivers: Adjust Gain via External Resistors, Dedicated Active Headpone Mute Pin, High Signal-to-Noise Ratio

– Two-Band DRC: Set Two Different Thresholds for Low- and High-Frequency Content.

2.5 U501(TMDS251PAGR)

General Description

The TMDS251 is a 2-port digital video interface (DVI) or high-definition multimedia interface (HDMI) switch that allows up to 2 DVI or HDMI ports to be

switched to a single display terminal. Four TMDS channels, one hot plug detector, and a digital display control (DDC) interface are supported on each port.

Each TMDS channel supports signaling rates up to 2.5 Gbps to allow 1080p resolution in 12-bit color depth.

The input port is enabled by configuring source selectors, S1 and S2. When an input port is selected, the TMDS inputs are connected to the TMDS outputs

through a 2-to-1 multiplexer, the MOSFET between the input DDC channel and the output DDC channel is turned on, and the HPD output follows the state

of the HPD_SINK. The other input port is inactive with disconnected input terminations, disconnected TMDS inputs to the outputs, disconnected DDC

inputs to the outputs, and the HPD outputs are low state. Check the source selection look up table for the details of port selections.

When S1 is high and S2 is low, all input terminations are disconnected, TMDS inputs are high impedance with standard TMDS terminations, all internal

MOSFETs are turned off to disable the DDC links, and all HPD outputs are connected to the HPD_SINK. This allows the initiation of the HDMI physical

address discovery process.

Termination resistors (50-

Ω

), pulled up to VCC, are integrated at each TMDS receiver input. External terminations are not required. A precision resistor is

connected externally from the VSADJ pin to ground for setting thedifferential output voltage to be compliant with the TMDS standard.

The TMDS251 provides two levels of receiver input equalization for different ranges of cable lengths. Each TMDS receiver owns frequency responsive

equalization circuits. When EQ sets low, the receiver supports the input connection in short range HDMI cables. When EQ sets high, the receiver supports

the input connection in long range HDMI cables. The TMDS251 supports power saving operation. When a system is under standby mode and there is no

digital audio/visual content from a connected source, the 3.3-V supply voltage, VCC, can be powered off to minimize power consumption from the TMDS

inputs, outputs, and internal switching circuits. The HPD, DDC, and source selection circuits are powered up by the 5-V supply voltage, VDD, to maintain

the system hot plug detect response, the DDC link from the selected source to the sink under system standby operation. The device is characterized for

operation from 0°C to 70°C.

Features

· Compatible with HDMI 1.3a

· Supports 2.5 Gbps Signaling Rate for 480i/p, 720i/p, and 1080i/p Resolutions up to 12-Bit Color Depth TMDS351 with Port 3 Disabled

· Integrated Switchable Receiver Termination

· Selectable Receiver Equalization to Accommodate to Different Input Cable Lengths

· Intra-Pair Skew < 40 ps

· Inter-Pair Skew < 65 ps

· HBM ESD Protection Exceeds 8 kV to TMDS Inputs · Digital TV

· 3.3-V Fixed Supply to TMDS I/Os

· 5-V Fixed Supply to HPD, DDC, and Source Selection Circuits

· 64-Pin TQFP Package