13
Setup menu
Auto installation
Analogue programme setup
Digital Programme Setup
Input skip
Input label
4
4
Position
4
Text language
Identification
Reset
[ On]
[ Panorama]
[ Off]
[ West Europe]
Setup
Option
HDMI auto view
WSS
4:3 mode
Quick start
Child lock
Digital setup
H
Child lock (ATV and DTV input mode only)
Allows you to use a password to protect certain
settings from being accidentally changed.
Setting a password
1
Repeat steps 1 to 2 in
Menu operation
.
2
Press
a
/
b
to select “Child lock”, and then
press
ENTER
.
3
If you already set the password, enter it here.
4
Press
a
/
b
to select “Change password”,
and then press
ENTER
.
Enter the 4-digit number as a password
using
0 — 9
.
New password
– – – –
Reconfirm
Change password
Clear password
Parental rating
–
– – –
Enter your new password. Use 4 digits
6
Enter the same 4-digit number as in step 5
to confi rm.
NOTE
• To view a locked channel (Lock setting in Analogue
programme setup “Manual adjust” is set to “On”), you
must enter a password. When you select a locked
channel, “Child lock has been activated” is displayed.
• Press
ENTER
to display the password input window.
Clearing the password
Allow you to clear your password.
1
Repeat steps 1 to 3 in
Setting a password
.
2
Press
a
/
b
to select “Clear password”, and
then press
ENTER
.
3
Press
c
/
d
to select “Yes”, and then press
ENTER
.
ECO menu
[ 3hr.]
No operation off
Ecology
Option
Power management
4
Setup
[ Enable]
No signal off
ECO
H
No signal off
You can set the TV to automatically power off in
about 15 minutes after the TV goes into a state of
receiving no programme signals. (Enable, Disable)
• Five minutes before the power shuts down, the remaining
time displays every minute.
NOTE
• When a TV programme fi nishes, and the TV receives
signal input, this function may not operate.
H
Power management (PC input mode only)
You can set the TV to automatically power off when
no image is displayed on PC.
Selected item
Description
Off
• No power management.
• Factory preset value.
Mode1
• If no signal inputs for approximately
8 minutes, the power shuts down.
• Even if you start using the PC and the
signal inputs again, the TV stays off.
• You can turns on manually by pressing
POWER
.
Mode2
• If no signal inputs for approximately
8 seconds, the power shuts down.
• When you start using the PC and the
signal inputs again, the TV turns on
automatically.
• You can turns on manually by pressing
POWER
.
H
No operation off
You can set the TV to automatically power off when
no TV operation is performed for more than 3 hours.
(30min., 3hr., Disable)
• Five minutes before the power shuts down, the remaining
time displays every minute.
H
Ecology
When set to “Yes”, the TV activates the following
power saving mode.
• “OPC” set to “On” (Page 12)
• “No signal off” set to “Enable” (Page 13)
• “Power management” set to “Mode1” (Page 13)
• “No operation off” set to “3hr.” (Page 13)
• “Quick start” set to “Off” (Page 15).
NOTE
• Ecology mode cannot be deactivated by selecting “No”.
Each setting must be changed individually to deactivate
Ecology mode.
5
LC40M500X_EN_CS2_A5.indd 13
LC40M500X_EN_CS2_A5.indd 13
10-Jun-11 10:22:38 AM
10-Jun-11 10:22:38 AM
