Sharp Aquos LC-32WD1E, Руководство по эксплуатации

Страница: 26 / 38

24
DTV menu operations
Child Lock
The Child Lock setting allows specific channels to be
blocked from viewing.
• Press YELLOW . An “L” will appear next to the
channel name, indicating that the channel is
locked.
NOTE :
• Press YELLOW again to unlock the channel.
• This setting indicates what channels to block from
access. However, for the
Child Lock setting to be
active, you must first set a PIN. See “Child Lock”
on page 25.
Automatic Search
The Automatic Search setting allows you to auto search
for available channels and radio stations, using the pre-
defined frequency channel list for the country or region.
1
Complete steps 1 to 2 in “Channels” on page 23.
2
Press S / T to select Search , and then press OK.
3
To do an automatic search, press GREEN .
NOTE :
• Completing an Automatic Search will re-set all
modifications previously made.
• Only new channels will be displayed. Already
known channels will be not.
• To change the country or region setting, you must
reset the receiver. See page 25.
• Press YELLOW to enter a specific frequency to
scan.
Manual Search
The Manual Search menu allows you to manually search
for a channel by frequency. (For example, if you want to
search for a specific channel, but do not want to re-set all
of the channels back to their default settings.)
1
Complete steps 1 to 2 in “Edit” on page 23.
2
Press S / T to select Search , and then press OK.
3
Press YELLOW .
4
Press W / X to select the channel you want to search
and then press GREEN .
The Signal Info setting provides advanced information
about the signal being received for a service.
To access the Installation menu:
1
Press DTV MENU .
2
Press S / T to select Installation , and then press OK.
If you have a PIN set in Child Lock , enter it now using
0–9 . See page 25 for information.
• The DTV Installation menu displays.
The Language menu allows you to select the language
preference. If a programme contains multiple language
information, you can set your first and second preferences
for audio and subtitles.
1
Repeat steps 1 - 2 in “Installation” on page 24.
2
Press
S
/
T
to select Language , and then press OK.
3
Press S / T to select the desired setting, and then
press W / X to change the setting.
NOTE :
• Additional settings may be available if MHEG
service is available. The options for these settings
depend on the input received from the channel
system.
Channel Search
Signal Info
Installation
Language
Audio 1 Specifies the first language preference
for the audio.
Audio 2 Specifies the second language
preference for the audio.
Subtitles 1 Specifies the first language preference
for the subtitles.
Subtitles 2 Specifies the second language
preference for the subtitles.
Page 24 of 204 June 8, 2007
TINS-DO52WJN1
SHPRN000205B-GLDN