15
Menu operations
Label
When a TV channel sends its Network Name, the Auto
Installation detects the information and assigns a name
to it. However, you can change individual channel
names.
1
Repeat steps 1 to 4 in
Manual Adjust
.
Colour sys.
Select the optimum colour systems to receive. (AUTO,
PAL, SECAM)
Sound sys. (Broadcasting system)
Select the optimum sound systems (Broadcasting
systems) to receive. (B/G, D/K, I, L, L’)
Skip
Channels with “Skip” set to “On” are passed over when
using
P
r
/
P
s
even if selected while watching the
image from the TV.
Decoder
When connecting a decoder to the unit, you need to
select EXT1.
NOTE
• “Off” is factory preset value.
2
Press
a
/
b
/
c
/
d
to select each character of the
new name for the channel, and then press
OK
.
3
Repeat step 2 above until the name is fully spelt
out.
• The name can be 5 characters or less.
• If a channel name is less than 5 characters, select
“END”, then press
OK
.
Programme Setup
This section describes how to set up analogue TV
channels manually.
1
Press
MENU
and the MENU screen displays.
2
Press
c
/
d
to select “Setup”.
3
Press
a
/
b
to select “Programme Setup”, and
then press
OK
.
If you have already set the PIN under “Child Lock”,
enter it here.
• See page 16 for setting PIN.
4
Press
a
/
b
to select “Auto Search”, “Manual
Adjust”, “Sort” or “Erase Programme”, and then
press
OK
.
Auto Search
Manual Adjust
Sort
Erase Programme
No
Yes
TV only
4
Press
a
/
b
to select the desired menu item, and
then press
OK
.
5
Press
a
/
b
/
c
/
d
to select or adjust.
NOTE
• When you exit Programme Setup “Manual Adjust” menu,
preset download automatically runs if you change
information on that menu.
Fine
You can adjust the frequency to your desired position.
NOTE
• Adjust while checking the background picture as a
reference.
• Instead of pressing
c
/
d
to adjust the frequency in step
5 above, you can set by directly entering the frequency
number of the channel with
0
–
9
.
EXAMPLE
• 179.25 MHz: Press
1
s
7
s
9
s
2
s
5
.
• 49.25 MHz: Press
4
s
9
s
2
s
5
s
OK
.
Auto Search
You can automatically search for and download TV
channels by performing the procedure below. This is
the same function as from programme auto search to
preset download in Auto Installation.
1
Repeat steps 1 to 4 in
Programme Setup
.
2
Press
c
/
d
to select “Yes”, and then press
OK
.
1
Programme auto search
2
Auto labelling
3
Auto sorting
4
Preset download
Manual Adjust
You can set some channel items manually.
1
Repeat steps 1 to 4 in
Programme Setup
.
2
Press
c
/
d
to select “Yes”, and then press
OK
.
3
Press
a
/
b
/
c
/
d
to select the channel you want
to edit, and then press
OK
.
• The selected channel information displays.
MENU
[Setup ... Programme Setup]
Fine
Colour sys.
Sound sys.
Label
Skip
Decoder
Lock
[179.25]
[AUTO]
[B/G]
[Off]
[SAT.1]
[Off]
[Off]
179.25
MHz
LC-37RA1E_GB_b
06.10.6, 7:20 AM
15
