Sharp Aquos LC-32RA1E, Руководство по эксплуатации

Страница: 16 / 28

14
Menu operations
Setup menu
MENU [Setup]
Setup Option
Child Lock
Auto Installation
Programme Setup
Position
WSS
4:3 Mode [Panorama]
[On]
[English] Language
Auto Installation
You can run Auto Installation again, even after setting
up the preset channels.
1
Press MENU and the MENU screen displays.
2
Press
c
/
d
to select “Setup”.
3
Press
a
/
b
to select “Auto Installation”, and then
press OK .
If you have already set the PIN under “Child Lock”,
enter it here.
• See page 16 for setting PIN.
4
Press
c
/
d
to select “Yes”, and then press OK .
5
You can set language and country the same as in
the initial auto installation. Follow steps 1 and 2
on page 7.
TV only
Power Management
Menu Operation: A (page 11)
When set, the TV will automatically enter the standby
mode.
Off: • No power management
• Factory preset value.
Mode1: • If there is no signal input for 8 minutes, the TV
enters the standby mode.
• Even if you start using the PC and the signal
inputs again, the TV stays in standby mode.
• The TV turns on again by pressing
a
on the TV
or
B
on the remote control unit. (See page 7.)
Mode2: • If there is no signal input for 8 seconds, the
TV enters the standby mode.
• When you start using the PC and the signal
inputs again, the TV turns on.
• The TV turns on again by pressing
a
on the TV
or
B
on the remote control unit. (See page 7.)
PC only
Item
Surround
Menu Operation: A (page 11)
Surround function allows you to enjoy realistic “live”
sound.
NOTE
• You can also choose surround effects by pressing
SURROUND on the remote control unit.
Clear Voice
Menu Operation: A (page 11)
This function emphasises speech voice against the
background noise for more intelligibility. It is not
recommended for music sources.
Power Control menu
No Signal Off
Menu Operation: A (page 11)
When set to “Enable” the TV will automatically enter
the standby mode if there is no signal input for 15
minutes.
• Five minutes before the TV enters standby mode, the
remaining time displays every minute.
NOTE
• When a TV programme finishes, this function may not
operate.
MENU [Power Control]
Audio Power Control
No Signal Off
No Operation Off
[Disable]
[Disable]
No Operation Off
Menu Operation: A (page 11)
When set to “Enable” the TV will automatically enter
the standby mode if no operations are performed for
3 hours.
• Five minutes before the TV enters standby mode, the
remaining time displays every minute.
TV/AV only
TV/AV only
Auto Vol.
Menu Operation: A (page 11)
Different sound sources, fairly often do not have the
same volume level, for example the changing from
movie to the advertisements. The Automatic Volume
Control (Auto Vol.) solves this problem and equalises
the volume levels.
TV/AV only
LC-37RA1E_GB_b 06.10.6, 7:20 AM 14