5
6
Remote control unit
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
6 FREEZE
Freeze a motion picture on the screen. (See page 12.)
7 EXIT
Return to the default screen.
8 Color
(Red/Green/Yellow/Blue)
TELETEXT* mode: Select a page. (See page 13.)
9 POWER
(STANDBY/ON)
To switch the power on and off. (See page 6.)
10 DISPLAY
Display the channel or input information.
11 SLEEP
Set the Sleep timer.
0 hr. 30 min.
1 hr. 00 min.
2 hr. 30 min.
1 hr. 30 min.
2 hr. 00 min.
Off
12 AV MODE
Select an audio and video setting. (See page 8.)
13 MPX
Select the sound multiplex mode.
14 INPUT (INPUT SOURCE)
Select an input source.
15 CH
r
/CH
s
TV input mode: Select the channel.
(
CH
r
) Increase the channel number.
(
CH
s
) Decrease the channel number.
TELETEXT* mode: Select the page. (See page 13.)
16 PC
Directly select the PC terminal.
17 MENU
Display the menu screen.
18
a
/
b
/
c
/
d
(Cursor)
Select a desired item on the setting screen.
ENTER
Execute a command.
19 RETURN
MENU mode: Return to the previous menu screen.
20
m
(TELETEXT*),
k
(Reveal hidden for TELETEXT*),
[
(SUBTITLE for TELETEXT*),
3
(Hold),
1
(Subpage),
v
(Top/Bottom/Full)
Use for TELETEXT* mode. (See page 13.)
1
e
(Mute)
Press
e
s
Mutes sound.
Press
e
again
s
Restores sound.
Mute will be canceled after 30 minutes. However,
the TV will not suddenly output loud sound as the
volume level will be set to 0 automatically. Increase
the volume level by pressing
VOL
k
.
2 0 – 9
Set the channel.
TELETEXT* mode: Set the page. (See page 13.)
3
A
(Flashback)
Press
A
to return to the previous selected channel
or external input mode.
4 WIDE
Change the wide image mode. (See pages 12 and 13.)
5 VOL
k
/VOL
l
Set the volume.
(
VOL
k
) Increase the volume.
(
VOL
l
) Decrease the volume.
NOTE
* TELETEXT function is not applicable for Philippines market.
Inserting the battery
Before using the TV for the fi rst time, insert a “AA” size battery (supplied). When the battery become depleted
and the remote control fails to operate, replace the battery with new “AA” size battery.
1
Open the battery cover.
2
Insert the supplied “AA” size battery.
3
Close the battery cover.
• Place battery with their terminals corresponding to the
(
e
) and (
f
) indications in the battery compartment.
CAUTION
• Battery (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fi re or the like.
Part names
TV (Front)
OPC sensor
POWER indicator
Light off
Power off
Lighted (Red)
The TV is in standby mode.
Lighted (Green)
The TV is on.
TV (Rear)
6
7
8
9
11
12
10
14
13
15
16
1
2
3
4
5
1
POWER
(On/Off) button
2
MENU
button
3
INPUT
button
4
Channel up (
r
)/down (
s
) buttons
5
Volume up (
e
)/down (
f
) buttons
6
RS-232C terminal
7
INPUT 7 (PC) terminals*
8
Antenna input terminal
9
INPUT 4 terminals
10
INPUT 5 terminals
11
INPUT 6 terminals
12
AUDIO OUT terminal
13
INPUT 2 (HDMI) terminal
14
INPUT 1 (HDMI) terminal*
15
INPUT 3 (HDMI) terminal
16
USB terminal
* The INPUT 1 and INPUT 7 terminals can both use the same audio input terminal. However, the proper item must be
selected in the “PC Audio Select” menu. (See page 11.)
• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.
Turning the TV on/off
Turning on/off the power
Standby mode
• To turn on the power
Press
POWER
on the TV. (After a few seconds, an image
appears with sound.)
• To turn off the power
Switch it off by pressing
POWER
on the TV.
• To standby mode
If the TV is switched on, you can switch it to standby by
pressing
POWER
on the remote control.
• Switching on from standby
From standby, press
POWER
on the remote control.
NOTE
• If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.
• Minor power is consumed when the unit is in standby mode.
Remote control sensor
LC32M400M_EN SPC.indd 3
LC32M400M_EN SPC.indd 3
4/29/2011 10:46:33 AM
4/29/2011 10:46:33 AM
