manualshive.com logo in svg

Sharp Aquos LC-32LE600E, Руководство пользователя

Sharp Aquos LC-32LE600E - качественный ЖК-телевизор с диагональю 32 дюйма. Для получения полной информации о настройке и установке, скачайте бесплатный сервисный мануал с сайта manualshive.com. У вас будет вся необходимая информация для использования этого отличного продукта.

Поделиться
Скачать
background image

LC-32/40/46LE600E/RU/S

6 – 2

IC4401   

VHiMT8295AE-1Q

CI_controller

This is a control IC for PCMCIA cards. This controls information on IC cards 
inserted into the PCMCIA card slot (SC4401) or information on software version 
upgrade cards saved on flash memories to transfer the data to CPUs and memo-
ries.

IC2701

VHiYDA148QZ-1Y

A-AMP

This IC is a digital audio power amplifier. It is mounted by 32QFN small package 
with 15W or less stereo. it drives by 10W in 26, and 32 types.

IC9612

VHiTCR5SB33-1Y

1CH-SW-REG
BU3.3V-REG

The TCR5SB33 is CMOS general-purpose single-output voltage regulators with 
an on/off control input, featuring low dropout voltage and low quiescent bias cur-
rent. The output current is possible up to 200mA or less. In this model, it generate 
BU3.3V.

IC9614

VHiS80928NM-1Y

Voltage detector with built-
in delay circuit

This IC is a highly precision voltage detector(2.8V) with built-in delay circuit. 
In this model, It used as enable signal of BU3.3V_REG.

IC9605

VHi-1Y

1CH-SW-REG
D3.3V-REG

LV5893M is 1.8A 1ch step down switching regulator. 
In this model, it generate D3.3V.

IC9611

VHiTCR5SB25-1Y

1CH-SW-REG
2.5V-REG

The TCR5SB25 is CMOS general-purpose single-output voltage regulators with 
an on/off control input, featuring low dropout voltage and low quiescent bias cur-
rent. The output current is possible up to 200mA or less. In this model, it generate 
CPU2.5V.

IC9608

VHi-1Y

1CH-SW-REG
D5V-REG

LV5893M is 1.8A 1ch step down switching regulator. 
In this model, it generate D5V.

IC9604   

VHiLV58072M-1Y

1CH-SW-REG
D1.1V-REG

LV58072M is 3A 1ch step down switching regulator. 
In this model, it generate D1.1V.

 

IC9606

VHi-1Y

1CH-SW-REG
D1.8V-REG

LV5805M is 2A 1ch step down switching regulator. 
In this model, it generate D1.8V.

IC9603

VHiMM3141YN-1Y

CPU1.25V-REG

MM3141 is single-output voltage regulators with an on/off control input.
In this model, it generate CPU1.25V. 

IC9610

VHiPQ1LAX95-1Y

S9V-REG

PQ1LAX95 is the low power loss regulator equipped with the on/off function and 
the over current protection function. In this model, it generate S9V. 

IC2602
IC9601
IC9613

VHiHC2G66DP-1Y

Bilateral Switch

This IC is provides a dual analog switch. Each switch has two pins for input or 
output and an active HIGH enable input.

[POWER UNIT]

IC7102

TNY274PN

BU5V 
SW-REG-CTL
for 40”/46”

This IC is IC for the switching regulator with Enhanced Flexibility and Extended 
Power Range
In this model, non-reg BU5V power supply is generated. 

IC7101

UCC28061

UR13V 
P-FACTOR

for 46”

This IC is IC that improves Power-Factor in 13V_Regulator circuit of 46 type 
power supply circuit. 
The protection functions such as UVLO, Brounout, OVP and AOC are built into in 
this IC.

IC7200

NCP1606B

UR13V 
P-FACTOR

for 40”

This IC is IC that improves Power-Factor in 13V_Regulator circuit of 40 type 
power supply circuit. 
The protection functions such as UVLO, Brounout, OVP and AOC are built into in 
this IC. 

IC7104

SSC9502S

UR13V 
SW-REG-CTL    for 40”/46”

This IC is switching power supply IC of a monolithic type. 
In this model, non-reg UR13V power supply is generated. 

IC7505

FA5573

VLCD
LOW-STANDBY
for 40”/46”

This IC is IC for the low standby power requirement type switching power supply 
control. 
In this model, backlight LED power supply (VLED=187/209V) is generated. 

IC7101

VIPER17

BU5V 
SW-REG-CTL
for 32”

This IC is switching power supply IC of the off-line converter type with a PWM 
control. 
In this model, non-reg BU5V power supply is generated.

IC7001

L6562A

UR13V 
P-FACTOR

for 32”

This IC is IC that improves Power-Factor in 13V_Regulator circuit of 32 type 
power supply circuit. 
The protection functions such as UVLO, Brounout, OVP and AOC are built into in 
this IC. 

IC7002

FA5538

UR13V 
SW-REG-CTL   for 32”

This IC is switching-power-supply control IC of the current mode system where 
power MOSFET drives directly. In this model, UR13V (32 types) is generated.

IC7251

FA5511

VLCD 
SW-REG-CTL   for 32”

This IC is IC for the PWM type switching power supply control. 
In this model, backlight LED power supply (VLED=144V) is generated. 

Ref No.

Name

Part Code

Description

Содержание Aquos LC-32LE600E





































































































Отзывы:

Нет отзывов

Похожие инструкции для Aquos LC-32LE600E

Samsung PS-63B680 Quick Setup Manual preview
PS-63B680
Бренд: Samsung Страницы: 4
Samsung PN51E8000 E- E-Manual preview
PN51E8000 E-
Бренд: Samsung Страницы: 101
Samsung PN59D6500 E- E-Manual preview
PN59D6500 E-
Бренд: Samsung Страницы: 99
Samsung PN51D530A3F Quick Setup Manual preview
PN51D530A3F
Бренд: Samsung Страницы: 2
Samsung PN43D490A1D E-Manual preview
PN43D490A1D
Бренд: Samsung Страницы: 212
Samsung Plasma TV 4 Series Quick Start Manual preview
Plasma TV 4 Series
Бренд: Samsung Страницы: 7
Samsung PN42C450 Quick Setup Manual preview
PN42C450
Бренд: Samsung Страницы: 2
Samsung PN60E550 E-Manual preview
PN60E550
Бренд: Samsung Страницы: 83
NEC PV32-AVT Specifications preview
PV32-AVT
Бренд: NEC Страницы: 2
Element FLX-3202 Limited Warranty preview
FLX-3202
Бренд: Element Страницы: 1
Hyundai HLP24T305 Instruction Manual preview
HLP24T305
Бренд: Hyundai Страницы: 102
Hyundai HLT-3220 Service Manual preview
HLT-3220
Бренд: Hyundai Страницы: 96
TCL L39E5390F-MS63F-LA Service Manual preview
L39E5390F-MS63F-LA
Бренд: TCL Страницы: 61
Daewoo DTQ-20D5FSN Service Manual preview
DTQ-20D5FSN
Бренд: Daewoo Страницы: 50
TCL LCD-27VSE Service Manual preview
LCD-27VSE
Бренд: TCL Страницы: 91
Vox LED SMART39ST2880 Operating Instructions Manual preview
LED SMART39ST2880
Бренд: Vox Страницы: 149
HANNspree DT07-10U1-000 User Manual preview
DT07-10U1-000
Бренд: HANNspree Страницы: 63
Kogan KALED32XXXWA User Manual preview
KALED32XXXWA
Бренд: Kogan Страницы: 28

Бренды по названию

Популярные бренды

Загрузить еще бренды