manualshive.com logo in svg

Sharp Aquos LC-32LE600E, Руководство пользователя

Sharp Aquos LC-32LE600E - качественный ЖК-телевизор с диагональю 32 дюйма. Для получения полной информации о настройке и установке, скачайте бесплатный сервисный мануал с сайта manualshive.com. У вас будет вся необходимая информация для использования этого отличного продукта.

Поделиться
Скачать
background image

LC-32/40/46LE600E/RU/S

6 – 1

LC32LE600E

Service Manual

 

CHAPTER 6. 

MAJOR IC INFORMATIONS

[1] MAJOR IC INFORMATIONS

1. DESCRIPTION OF MAJOR ICs

Ref No.

Name

Part Code

Description

[MAIN UNIT]

IC1301

VHiAK4341ED-1Y

DAC

AK4341 is 24 bits DAC of 2Vrms output. A newly developed advanced multiple bit 
system is adopted in the 

 modulator. In this model, this IC is used to use the 

audio signal from a digital tuner as an audio output signal of SCART1. 

IC1302   

VHi-1Q

Audio multiplexer

The MediaTek MT8292 introduces the advantages of an input multiplexer, the 
headphone driver and the PGA outputs. The analog input pins can either inde-
pendently support GPIO function or provide extra GPIO pins to use. The analog 
input pins can either independently support GPIO function or provide extra GPIO 
pins to use.

IC1303

VHiS80944NM-1Y

Voltage detector with built-
in delay circuit

This IC is a highly precision voltage detector (4.4V) with built-in delay circuit.
In this model, It used as voltage detector of MUTE signal. 

IC1104

VHiPQ1LA505-1Y

ANT5V-REG

PQ1LA505 is series regurator with an on/off function and the over current protec-
tion function.
In this model, it generate 5V.

IC501

VHi2BR24C21F-1Y
for service
(RH-iXC206WJQZS)

1K E2PROM

This IC is a 1Kbit-2-wire (I2C bus type) serial EEPROM that can be programmed 
electrically. The EEPROM chip stores the EDID data of PC input. This data is 
controlled through I2C signals.

IC506

VHiM3221EiP-1Y

RS232C-DRIVER

The MAX3221E is a single driver, single receiver RS-232 solution operating from 
a single Vcc supply. The RS-232 pins provide IEC G1000-4-2 ESD Protection. 
The device meets the requirements of TIA/EIA-232-F and provides the electrical 
interface between an asynchronous communication controller and the serial-port 
connector.
The charge pump and four small external capacitors allow operation from a single 
3V to 5.5V supply. 

IC1508

VHiSii91873-1Q

HDMI_Port _Processor

The SiI91873 HDMI port processor is the second generation of HDMI devices 
that support revision 1.3 of the HDMI specification.
The main feature is as follows. 
1) 4-input, 1-output HDMI port processor.
2) Integrated TMDS receiver and transmitter cores capable of receiving and 

transmitting at 2.25Gbps.

3) Supports video resolutions up to 1080p, 60Hz, 12bit or 720p/1080i, 

120Hz,12bit.

4) Receiver fully comply with DVI1.0, HDCP1.1 and HDMI1.3 specifications.

IC3302

VHi-1Y

USB high side SW

BD6538G is single channel high side powers switch with low ON resistance Nch 
power MOSFET. 
Rich safety functions such as over current detection, Thermal shutdown (TSD), 
under voltage lock out (UVLO) and soft start function which are required for the 
power supply port protection are integrated into 1chip.

IC3303   

RH-iXC758WJQZQ

VCT & Main CPU

This IC is Video Processor & MAIN CPU. 
In this IC, the decode processing and the video signal processing are done. 
Moreover, OSD is generated here and added to a picture signal.

IC3304

VHiS80928NM-1Y

Voltage detector with built-
in delay circuit

This IC is a highly precision voltage detector (2.8V) with built-in delay circuit. In 
this model, It uses as RESET signal of IC3303. 

IC3305

VHiS80920NM-1Y

Voltage detector with built-
in delay circuit

This IC is a highly precision voltage detector (2.0V) with built-in delay circuit. In 
this model, It used as a D-POW signal generator.

IC3501/2

RH-iXC505WJQZQ

512Mb-DDR2-SDRAM

This IC is 512Mb DDR2 SDRAM.
This IC operates as a memory of IC3303 (Video Processor). ***

IC8403   

RH-iXC788WJN2Y

2Mb-Serial-FLASH

This IC is 2Mbit CMOS 3.0 Volt Flash Memory with 50-MHz SPI (Serial Peripheral 
Interface) Bus and Small Sector for Boot and Parameter Storage.

IC8401

RH-iXC721WJQZQ

512Mb-NAND-FLASH

This IC is 512Mb NAND flash memory.
This IC stores the software data that processes the system of TV such as the 
graphic processing, the LCD controls, and backlights etc. 

IC8455

VHiBR24S64F-1Y

I2C bus type-64K 
E2PROM

The BR24S64F is a 64Kbit-2-wire (I2C bus type) serial EEPROM that can be pro-
grammed electrically.
This IC stores the menu data and the adjustment value data of adjustment pro-
cess mode etc.
The data is given out by commands from the main microprocessor.

IC4402

VHiAOZ1320C-1Y

SMART LOAD SW

The AOZ1320 is a P-channel high-side load switch with controlled slew rate. 
AOZ1320-04 have a slew rate of 1ms.

Содержание Aquos LC-32LE600E





































































































Отзывы:

Нет отзывов

Похожие инструкции для Aquos LC-32LE600E

TCL P6 Series Operation Manual preview
P6 Series
Бренд: TCL Страницы: 24
Olevia 237T User Manual preview
237T
Бренд: Olevia Страницы: 74
Panasonic Viera TX-32A400B Service Manual preview
Viera TX-32A400B
Бренд: Panasonic Страницы: 27
TCL 32S4610R User Manual preview
32S4610R
Бренд: TCL Страницы: 79
Dual DTFT 27-1 Operating Instructions Manual preview
DTFT 27-1
Бренд: Dual Страницы: 140
Dynex DX-24E150A11 (French) Manual D'Installation Rapide preview
DX-24E150A11
Бренд: Dynex Страницы: 2
Magnavox TS3270 Owner'S Manual preview
TS3270
Бренд: Magnavox Страницы: 32
Grundig 28 VLE 5401 WG Manual preview
28 VLE 5401 WG
Бренд: Grundig Страницы: 60
Bush IDLCD1904HD Instruction Manual preview
IDLCD1904HD
Бренд: Bush Страницы: 25
Hyundai H-PDP4201 Service Manual preview
H-PDP4201
Бренд: Hyundai Страницы: 53
Samsung UE32EH5300 User Manual preview
UE32EH5300
Бренд: Samsung Страницы: 88
Samsung CS762ANT/SEHX Service Manual preview
CS762ANT/SEHX
Бренд: Samsung Страницы: 40
Ekselans 280047 User Manual preview
280047
Бренд: Ekselans Страницы: 43
Steren LCD-600 Manual preview
LCD-600
Бренд: Steren Страницы: 5
Panasonic VIERA TH-L32XM5A Operating Instructions Manual preview
VIERA TH-L32XM5A
Бренд: Panasonic Страницы: 52
Panasonic TCL37D2 - 37" LCD TV Operating Instructions Manual preview
TCL37D2 - 37" LCD TV
Бренд: Panasonic Страницы: 172
Panasonic Viera TH-65EX600A Operating Instructions Manual preview
Viera TH-65EX600A
Бренд: Panasonic Страницы: 24
Panasonic Viera TH-65EX600H Operating Instructions Manual preview
Viera TH-65EX600H
Бренд: Panasonic Страницы: 24

Бренды по названию

Популярные бренды

Загрузить еще бренды