Sharp Aquos LC-32GP3UB, Руководство по эксплуатации

Страница: 26 / 72

24
Basic adjustment settings
Press MENU to display the MENU screen, and
then press
c
/
d
to select “Setup”.
Press
a
/
b
to select “EZ Setup”, and then
press ENTER .
• If you already set the Secret No., go to step 3. If
not, skip to step 4.
Input the 4-digit secret number by using 0 – 9 .
Press
a
/
b
to select the desired language
listed on the screen, and then press ENTER .
Press
c
/
d
to select “Air” or “Cable”.
Press ENTER to enter the setting.
Antenna setting
Make sure what kind of connection is made with your
TV when selecting “Air” or “Cable”.
Channel search
Channel auto search makes the TV look for all
channels viewable in the set area.
NOTE
• If no channel is found, confi rm the type of connection made
with your TV and try EZ Setup again.
• If you select “Analog Search Start” and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
EZ Setup
You can run EZ Setup again, even after setting up the
preset channels.
Channel Setup
If initial setup does not memorize all the channels in
your region, follow the instructions below to manually
memorize the channels.
Antenna setting
Press MENU to display the MENU screen, and
then press
c
/
d
to select “Setup”.
Press
a
/
b
to select “CH Setup”, and then
press ENTER .
• If you already set the Secret No., input the 4-digit
secret number here. See page 43 for setting a
secret number.
Press
c
/
d
to select “Air” or “Cable”.
Press ENTER to enter the setting.
Press
a
/
b
to select “Air/Cable”, and then
press ENTER .
Channel search
Channel auto search makes the TV look for all
channels viewable in the set area.
Repeat steps 1 and 2 in Antenna setting in
Channel Setup .
Press
a
/
b
to select “CH Search”, and then
press ENTER .
NOTE
• If no channel is found, confi rm the type of connection made
with your TV and try channel search again.
• If you select “Analog Search Start” and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
1
2
3
4
5
6
1
2
3
4
1
2
When “Air” is selected in Antenna setting:
Press
c
/
d
to select “Start”, and then press
ENTER .
When “Cable” is selected in Antenna
setting:
Press
a
/
b
to select “Analog & Digital Search
Start” to search both analog and digital
broadcasts or “Analog Search Start” to search
only analog broadcasts, and then press
ENTER .
• The Channel search will start automatically.
• To exit the Channel search screen, select “Cancel”,
and then press ENTER .
When “Air” is selected in Antenna setting:
Press
c
/
d
to select “Start”, and then press
ENTER .
When “Cable” is selected in Antenna
setting:
Press
a
/
b
to select “Analog & Digital Search
Start” to search both analog and digital
broadcasts or “Analog Search Start” to search
only analog broadcasts, and then press
ENTER .
• The Channel search will start automatically.
• To exit the Channel search screen, select “Cancel”,
and then press ENTER .
3
Press MENU to exit.
7
Press MENU to exit.
4
Press MENU to exit.
5
Language setting
Select from among 3 languages: English, French and
Spanish.
LC-32GP3U̲BWR̲E.indb 24 LC-32GP3U̲BWR̲E.indb 24 2007/09/19 11:19:18 2007/09/19 11:19:18