Sharp Aquos LC-32G4U, Руководство по обслуживанию

Страница: 43 / 114

46
6 5 4 3 2 1
A
B
C
D
E
F
G
H
LC-32G4U/G4D
LC-37G4U/G4D
DESCRIPTION OF SCHEMATIC DIAGRAM
CAUTION:
This circuit diagram is original one, therefore there may be a
slight difference from yours.
IMPORTANT SAFETY NOTICE:
PARTS MARKED WITH “
å
” ( )ARE IMPORTANT
FOR MAINTAINING THE SAFETY OF THE SET. BE SURE
TO REPLACE THESE PARTS WITH SPECIFIED ONES FOR
MAINTAINING THE SAFETY AND PERFORMANCE OF
THE SET.
VOLTAGE MEASUREMENT CONDITION:
1. The voltage of each part is the value on operation of
the monitor only. It is measured using a 20 k
Ω
/V tester.
INDICATION OF RESISTOR & CAPACITOR:
RESISTOR
1. The unit of resistance “
Ω
” is omitted.
(K=k
Ω
=1000
Ω
, M=M
Ω
).
2. All resistors are ± 5%, unless otherwise noted.
(J= ± 5%, F= ± 1%, D= ± 0.5%)
3. All resistors are Carbon type, unless otherwise noted.
C
: Solid
W
: Cement
S
: Oxide Film
T
: Special
N
: Metal Coating
CAPACITOR
1. All capacitors are mF, unless otherwise noted.
(P=pF=mmF).
2. All capacitors are Ceramic type, unless otherwise
noted.
(ML) : Mylar
(TA) : Tantalum
(PF) : Polypro Film (ST) : Styrol
WICHTIGE
SICHERHEITSANMERKUNGEN:
MIT “
å
” ( )BEZEICHNETEN TEILE SIND
BESONDERS WICHTIG FÜR DIE AUFRECHTERHALTUNG
DER SICHERHEIT . BEIM WECHDIESER TEILE SOLLTEN
DIE VORGESCHRIEBENEN TEILE IMMER VERWENDET
WERDEN, UM SOWOHL DIE SICHERHEIT ALS AUCH DIE
LEISTUNG DES GERÄTES AUFRECHTZUERHALTEN.