89
Other viewing options
Twin picture functions
Allows you to display two pictures on the screen at
one time.
Twin picture in all cases
You can display two same-sized pictures except when
inputting from INPUT 4 (HDMI) and INPUT 5 (DVI-I)
terminals and CARD.
Press
TWIN PICTURE
.
• Twin picture displays and a selected input
source image displays.
Press
SELECT
to set either screen to be
active.
• “
z
” displays on the active screen, which has
sound output.
Press
TWIN PICTURE
to exit twin picture.
NOTE
• This function does not work under the following input conditions:
1
INPUT 4 (HDMI),
2
INPUT 5 (DVI-I),
3
CARD,
4
Two pictures from the same source (e.g. INPUT 1 and INPUT 1),
5
An image will appear on the right side only if it is a 480i signal.
*An SDTV image has a 480p signal, so it will not appear either.
• When this function is not available, “No dual screen display available”
will display.
• Pressing
ANT-A/B
while viewing in Twin Picture mode (TV image and
video image) with TV selected will display the TV image of the other tuner.
• A message "Cannot switch screens" will appear.
Picture and still image
You can display two same-sized pictures – one moving
and one still.
Press
FREEZE
.
• A moving image displays on the left screen and
a still image displays on the right screen. The
still image is one frame captured from a moving
image at the moment you press
FREEZE
.
Update the still image by pressing
ENTER
.
• Each time you press
ENTER
, the image on the
right screen updates.
• If a PC card with enough capacity is inserted
in the system, a message will appear on the
screen asking you whether to save the image.
Press REC on the remote control if you want to
save.
Press
FREEZE
to exit still image.
NOTE
• This function does not work in INPUT 4 (HDMI), INPUT 5
(DVI-I) and CARD.
• When this function is not available, “No still image display
available.” will display.
• Another image can be saved if a PC card with enough
capacity is inserted in the system.
• The still image automatically goes out after 30 minutes.
• If you are using FREEZE and a broadcast activates the V-
CHIP BLOCK, FREEZE will cancel and a block message
will appear.
FREEZE
1
2
3
1
2
3
LC-32/37G4U(E)-89-94
04.4.7, 2:38 PM
89
