Menu operations
H-Pos.:
Centres the image by moving it to the left or
right.
V-Pos.:
Centres the image by moving it up or down.
NOTE
•
Adjustments are stored separately according to input
source.
• Depending on the input signal type a position setting may
not be available.
WSS (Wide Screen Signalling)
Menu Operation: A (page 12)
WSS allows a television to switch automatically among
the different screen formats.
NOTE
• Use WIDE MODE if an image does not switch to the
correct screen format. When the broadcast signal contains
no WSS information, the function will not work even if
enabled. (See page 20.)
4:3 Mode
Menu Operation: A (page 12)
The WSS signal has 4:3 auto-switching that allows you
to select between Normal and Panorama.
Normal:
Normal range keeping 4:3 or 16:9 aspect ratio
Panorama:
Wide image without side bars
WSS signal 4:3 screen
4:3 mode “Panorama”
4:3 mode “Normal”
Language
Menu Operation: A (page 12)
You can select a language from the Setup menu.
Select from among 13 languages. (Dutch, English,
Finnish, French, German, Greek, Italian, Polish,
Portuguese, Russian, Spanish, Swedish, Turkish)
Supply Voltage
Menu Operation: A (page 12)
Switch on or off the power to the antenna connected
to the antenna input terminal. (See page 4.)
Option menu
MENU
[Option]
Option
Audio Only
DNR
Input Select
Colour System
[Off]
[CVBS]
[AUTO]
NOTE
• “HDMI Setup” is displayed only when “EXT6” or “EXT7” is
selected from the INPUT SOURCE menu.
Audio Only
Menu Operation: A (page 12)
When listening to music from a music programme, you
can set the TV off and enjoy audio only.
Off:
Both screen images and audio are output.
On:
Audio is output without screen image.
Fine Sync.
Menu Operation: C (page 12)
Ordinarily, the TV automatically adjusts image positions
coming from PC (Auto Sync. function). In some cases,
however, manual adjustment is needed to optimise the
image.
H-Pos.:
Centres the image by moving it to the left or
right.
V-Pos.:
Centres the image by moving it up or down.
Clock:
Adjusts when the image flickers with vertical
stripes.
Phase:
Adjusts when characters have low contrast or
when the image flickers.
NOTE
• If you need to adjust the image position, adjust the position
using your PC.
Item
TV/DTV/AV only
Position
Menu Operation: C (page 12)
For adjusting a picture’s horizontal and vertical position.
XGA Mode
Menu Operation: C (page 12)
You can select one of the 3 input signals listed below
to adjust the picture resolution when the PC input is an
XGA signal.
1024
g
768
1280
g
768
1360
g
768
NOTE
• Depending on the graphics card, resolutions of 1360
g
768 may not display correctly.
18
Item
Item
Item
PC only
PC only
TV/DTV/AV only
TV/DTV/AV only
TV/DTV/AV only
LC-26D44E-gb.indd 18
LC-26D44E-gb.indd 18
2008/02/19 10:21:32
2008/02/19 10:21:32
