Sharp AQUOS LC-19D45U Скачать руководство пользователя страница 42

Страница: 42 / 126

LC-19SK25U/U-W

LC-19SB25U/U-W

LC-19SB15U

LC-19D45U

5. On Setting Items

* "EZ-SETUP" discussed below indicates "EZ-SETUP after the first power-on".
(1) POWER ON FIXED

(2) MAXIMUM VOLUME

(3) VOLUME FIXED

Selection
Default
Explanation

Limit in Setting
Exception
Remarks

Selection between

Variable

and

Fixed

(loop provided)

Variable
In

Fixed

setting, the power-off by the power key of the unit is invalidated and the image is kept being re-

ceived. The power can be turned off by stopping the power supply from AC.
Refer to the

Power-On Fixed

sheet.

None

Selection
Default
Explanation
Limit in Setting

Exception
Remarks

Adjustment from 0 to 60 (no loop)
60
Sound volume can not be adjusted higher than the preset value.

•

When the sound volume is set lower than 59, only figures are displayed and the sound volume bar is

not displayed.

•

The maximum sound volume for ON-timer (Wake up timer) is limited also to the preset value.

None

•

In line output (sound volume variable), the sound volume can be adjusted from 0 to 60 irrespective of

pre-adjusted value.

•

When the sound volume is set higher than the MAX setting by the adjusting process, the sound volume

control operation is prohibited for turn-up and the sound volume should be turned down to MAX in this
state.

Selection
Default
Explanation
Limit in Setting

Exception
Remarks

Selection between "Variable" and "Fixed" (loop provided)
Variable
Sound volume is fixed and made invariable.

•

The sound volume for the ON-timer (Wake up timer) is fixed also without display of menu. Besides, the

setting is made impossible. (Basically, the menu is not displayed.)

•

The following keys become invalid:

•

Sound volume Up/Down (VOL +/-) [for both remote control and the unit]

•

Mute (MUTE)

None

•

In line output (sound volume variable), the sound volume can be adjusted from 0 to 60 irrespective of

pre-adjusted value.

•

As for sound volume fixing and sound volume MAX level, the sound volume fixing has priority.

•

Once the sound volume has been changed by adjustment process, it should be set back to the sound

volume preset by sound volume fixing level when the adjustment process ends .

(4) VOLUME FIXED LEVEL

Selection
Default
Explanation
Limit in Setting
Exception
Remarks

Adjustment from 1 to 60 (no loop)
60
The sound volume to be fixed by

Volume fixed

is determined.

None
None
Setting is valid only when

Volume fixed

is selected for

fixed

Содержание AQUOS LC-19D45U






























































































































Результаты поиска

Содержание AQUOS LC-19D45U

Отзывы:

Sharp AQUOS LC-19D45U, Руководство по обслуживанию, Страница: 42 / 126

Результаты поиска

Содержание AQUOS LC-19D45U

Отзывы: