Sharp AQUOS LC-19D45U Скачать руководство пользователя страница 40

Страница: 40 / 126

LC-19SK25U/U-W

LC-19SB25U/U-W

LC-19SB15U

LC-19D45U

PUBLIC MODE SETTING PROCEDURE

1. How to start Public Mode

•

There are the following two ways to get the public mode setup screen displayed.

In the adjustment process mode, turn on "HOTEL MODE". Also press the "CH (

)" and "VOL (+)" keys

on the set at once and turn on the power.

1) Press the "INPUT" and "VOL (+)" keys on the set at once and turn on the power.

2) Get the password input screen displayed.

Procedure

•

The input starts with the leftmost digit.

•

Use the numeric keys [1] thru [9] and [0] keys on the remote con-

troller. The other keys are not acceptable.

•

With a numeric-key input, "–" will change to "

✽

". The input position

will move one digit to the right.

•

With all the 3 digits entered, the password will be verified.

3) The 3-digit password is now verified.

The password [0] [2] [7] provides for the public mode screen. (This screen comes on with whatever ad-

justment process settings.)

With any other passwords, the screen changes to the normal mode.

— — —

✽

— —

✽

Содержание AQUOS LC-19D45U






























































































































Результаты поиска

Содержание AQUOS LC-19D45U

Отзывы:

Sharp AQUOS LC-19D45U, Руководство по обслуживанию, Страница: 40 / 126

Результаты поиска

Содержание AQUOS LC-19D45U

Отзывы: