Sharp Aquos LC-15S5H, Руководство по эксплуатации

Страница: 14 / 28

Preset (Continued)
13
■
Setting a channel to a desired TV station
Upper control panel
Press MENU (PRESET-
1
) on the upper part of the
LCD TV set for more than 2 seconds to display the
AUTO mode screen.
Press MENU (PRESET-
1
) to display the MANUAL
mode screen.
• Press MENU (PRESET-
1
) again to change the
MANUAL mode as shown below.
AUTO MANUAL LANGUAGE NORMAL SCREEN
Select the channel position using Channel Select or
CH ( )/( ) .
Press VOL (–)/(+) (PRESET-
2
) to locate the
channel you want to preset to the position. Search is
initiated and when a TV signal is received during the
search, the search stops.
Repeat steps 3 and 4 above, to preset the channel
positions for other broadcasts, etc.
Press MENU (PRESET-
1
) twice to return to the
normal screen.
NOTE
•
System may not have been set correctly, if noise can be heard or
if there is no sound. In such a case, adjust “SOUND SYSTEM”.
(See page 14.)
Presetting the Channels (MANUAL)
■
In a weak reception area or under bad reception
conditions
Upper control panel
Press MENU (PRESET-
1
) on the upper part of the
LCD TV set for more than 2 seconds to display the
AUTO mode screen.
Press MENU (PRESET-
1
) to display the MANUAL
mode screen.
While the MANUAL mode screen is displayed, press
MENU (PRESET-
1
) for more than 2 seconds.
The channel position number remains in green.
Adjust for good reception using VOL (–)/(+)
(PRESET-
2
).
After finishing the adjustment, press MENU
(PRESET-
1
) to continue channel presetting.
NOTE
•
While the MANUAL mode screen is displayed, press MENU
(PRESET-
1
).
(The LANGUAGE mode screen will appear.)
Sound system
1
2
3
4
5
6
1
2
5
3
4