18
Preparation
Turning the TV on/off
NOTE
• If
you
are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
• A small amount of electric
power
is still consumed even the
TV is in
standby
mode.
• If the TV loses
power
in special circumstances (such as
power outage or grid fluctuations, etc.), it may not work
well when it is switched on again. Please try to power
off the TV
(by
the
(
POWER
) on the remote control) or
unplug and replug the AC cord to restart the TV.
• It is a normal phenomenon
when
the TV temperature rises
in the process of
watching
TV.
• Please do not cut off the
power
casually
in the process
of
switching
on or
switching
off the TV, running APPS or
updating,
otherwise
TV
system
could not
work
correctly.
Please turn off the TV after closing all APPS.
Running the TV for the first time
Turning off the TV
After inserting the AC cord,
the TV is in
standby.
Press (
POWER
) on the remote control or on the TV:
If the TV is
switched
on, press
(
POWER
) on the
remote control :
• TV is
switched
on.
• You can
switch
the TV to
standby
by
pressing (
POWER
)
on the remote control .
• TV is
switched
into
standby
and the image disappeared.
• Press
(
POWER
) on the remote control to turn on the TV.
• If
you
want
to turn off the TV from
standby,
please pull out
the AC cord.
User Guide
When the TV
powers
on for the first
time after
purchase, the setting
wizard
appears.
Follow
the
menus and make the necessary settings one after
another.
Confirm the following before turning on the
power
• Is the antenna cable connected?
• Is the AC cord plugged in?
Press
(POWER) on the TV.
• It
displays
the boot screen , and then “Language
Setting”
appears.
• It
may
cost a little time
when
TV is
switched
on for
the first
time. Please
wait
patiently.
You can select the Language Setting among the “
繁體
中文”
, “
简体中文
” or “EN” .
Please select “Home”
when
you
watch
TV at home.
• “Home”: “STANDARD”
will
be the default value for the
“picture mode” setting.
• “Store”: “Store” is
only
for retail store
displays.
“Bright”
will
be the default value for the
“picture mode” setting.
Language Setting
Please Select The Environment
You can select “Ethernet” or “Wi-Fi” to connect the
network.
Please see page 24 to 25.
Network Setting
