13
Preparation
The remote control unit has been pre-paired
with
the
TV set in
factory
so
you
can use the remote control
unit
directly.
If the remote control fails to operate or
a new remote control unit is used, please follow the
following steps to pair the remote control unit and the
TV.
Remote control pairing
You can also setup the TV through the operation
button at the TV back. (The position of the operation
button, please see page 11)
The operation button
Action
Description
Short press
Turn on the TV.
Left/Right
Set the volume
reduction/add.
Up/Down
Set the channel
up/down.
Long press
Display
the menu (Pairing
,Power
off)
when
the TV is
switched
on.
NOTE
• If the TV does not
display
the remote control pairing
information, the "Pairing" Interface
will
be
displayed
automatically. Press
OK
& (POWER) on the remote
control unit at the same time, the red and blue lights
flash alternately. Once the flashing stop, press
OK
to
complete the Bluetooth pairing.
• If pairing is not succeed, please
try
again or contact the
customer service center.
Press the " " button on the TV for a
few
seconds, "Pairing "and "Power off " menu will
be displayed.
1
Point the remote control unit towards the
bottom left corner of TV
(within
20cm),
press
"
OK
" and " " at the same time until red and
blue lights stop flashing alternately .
Press "
OK
" on the remote control unit to
complete the Bluetooth pairing .
3
4
2
Use
the operation button on the TV to choose
"Pairing" and then press the TV operation
button.
