Sharp aqos, Руководство по эксплуатации

Страница: 73 / 113

>>
<<
Using the Internet
ENG 7-3
Internet Setup (Continue)
Wireless Setup
Make adjustments and confirm the settings necessary for
wireless LAN connection (such as search for the access
point and registration of it).
WPS push button:
Allows the TV to automatically
establish the connection using a button on the access
point.
WPS PIN code:
Sets up the connection by registering a
PIN code for the access point.
Selecting wireless network:
Searches for and selects the
access point to be connected.
Registering wireless network:
Allows you to make the
connection by entering an SSID for the access point.
If your access point supports Wi-Fi Protected Setup (WPS
push button method), it is recommended that you use this
function for the wireless connection. You can press the WPS
button on the access point to configure the settings
automatically.
The name of the WPS button function may differ
depending on the access point. See the operation
manual of the access point for details.
1
Confirm the current settings in "Connection Type".
If "Wired" is selected, pre
ss /
to select "Wireless".
2
Press / to select "Wireless Setup", and then press
ENTER
.
Confirm the settings. If each setting item is correct,
press
MENU
to exit.
If you are configuring the wireless setup for the first
time or changing the settings, go to step 3.
3
Press / to select "Change", and then press
ENTER
.
4
Select the desired connection method and follow the
instructions shown on the display.
5
When a connection is established, the connection details
are displayed. Press
ENTER
.
NOTE
Operations cannot be guaranteed when used with
access points that do not have Wi-Fi® certification.
A wireless LAN router/access point is required to
connect the TV to the Internet using a wireless LAN. See
the operation manual of your access point for setup.
If your access point is set to a stealth mode (that
prevents detection by other devices), you may not be
able to establish a connection. In this case, disable the
stealth mode on the access point.
A stable connection speed is required to play back
streaming content. Use an Ethernet connection if the
wireless LAN speed is unstable.
Before transferring to a third party or disposal, be sure
to initialize the wireless LAN settings.
Please follow the legislation in your country when using
the wireless LAN outdoors.
IP Setup
You can make adjustments manually for the IP.
Check that numbers are displayed for each setting.
If there are any settings without numbers, specify the
numbers by following the on-screen instructions.
Input the IP address by using remote control buttons 0-
9.
Example