Sharp aqos, Руководство по эксплуатации

Страница: 45 / 113

>>
<<
On-Screen Display Menu
ENG 4-12
Example
Initial Setup (Continue)
Input Settings
HDMI auto view
When you view images sent from external equipment in an
HDMI connection, this function allows the image size on the
TV to automatically switch to an appropriate one.
NOTE
Refer to your external equipment operation manual for
the signal type.
Digital audio output
You can output digital audio to an AV amplifier or similar
device whose DIGITAL AUDIO INPUT terminal is connected
to the DIGITAL AUDIO OUT terminal on the TV. Please
select an audio output format compatible with the audio
format of the program you are watching and the equipment
connected.
PCM:
For connecting to equipment that does not support
Dolby Digital. The same audio (main, sub, or main/sub)
as the audio of the program being viewed is output.
2-channel audio with a sampling rate of 48 kHz or less is
output as linear PCM audio.
Bitstream:
For connecting to an audio system that
supports Dolby Digital. Audio is output through both the
main and sub channels.
NOTE
Analog channel audio and video input audio are output
in PCM mode even when "Bitstream" is selected.
PCM digital input signals are output in PCM mode even
when "Bitstream" is selected.
Audio Select
This function sets the terminal to output the computer audio.
The adjustment items vary depending on the input source.
Select the input source corresponding to the terminal
connected to the PC and then adjust the desired item.
HDMI 1(Digital):
Select this when the TV and PC are
connected using an HDMI-certified cable and audio is
input via the same cable.
HDMI 1+ Analog:
Select this when the TV and PC are
connected using an HDMI-certified cable and the audio
is input via an RCA audio to an RCA audio of
component/video.
NOTE
When "Audio Select" is set to "HDMI(Digital)", sound will
not be produced if you use only an HDMI-certified cable
to connect HDMI-compatible equipment. To produce
sound, you should make an analog audio connection.
If you want to connect HDMI-compatible equipment
using only an HDMI-certified cable, set "Audio Select" to
"HDMI(Digital)".
Output Select
Allows you to select what controls the audio output.
Fixed:
Sound via speaker is adjusted with
VOL+/-
on the
remote control unit.
Sound via the AUDIO OUT terminal is not adjustable and
outputs at a consistent level.
Variable:
Sound via the AUDIO OUT terminal is adjusted
with
VOL+/-
on the remote control unit.
Sound via speaker is muted.
Input Select
For image input applied to the COMPONENT IN or VIDEO
IN terminal, switch to “
COMPONENT
” or “
Video
”,
respectively.
COMPONENT:
Select component video
Video:
Select composite video.
NOTE
If no (color) image display, try changing to another
signal type.
Check the operation manual of the external equipment
for the signal type.
Input Skip
This setting allows you to skip the HDMI, COMPONENT or
Video Input ("HDMI 1, HDMI 2, COMPONENT and Video")
on the Input Selection operation.
NOTE
If you connect external equipment to an HDMI terminal
which you have set to be skipped, a notification
message appears on the display when a signal is
received from the connected external equipment. Press
"Yes" to reset the related skipping setting so that the