Sharp AL-840 - B/W Laser Printer Скачать руководство пользователя | Manualshive

Страница: 6 / 31

background image

4

1

Getting Started

INSTALLING THE PRINTER DRIVER SOFTWARE

Description of the printer driver

The printer driver is the software program which runs the printer. It converts the data in your file
into information that the printer can understand. It also controls communication between the
printer and computer as the data is printed.

Checking the hardware and software requirements

You will need the following hardware and software in order to install the printer driver.

Computer type

IBM PC/AT or compatible computer equipped with a bi-
directional parallel interface and CD-ROM

Windows type

Windows 3.1x, Windows 95, Windows 98, Windows NT
4.0

CPU

486DX 66MHz or better

Physical RAM

Windows 95, Windows 3.1x: 8 MB (16 MB or more is
recommended.)
Windows NT 4.0: 12MB (16MB or more is recommended.)
Windows 98: 16MB (32MB or more is recommended.)

Virtual storage (swap file)

8 MB or more

Display

640 x 480 dots (VGA) or better

Hard disk free space

10 MB or more

The printer driver included in this product cannot be used under Windows NT
3.5x, OS/2, pure MS-DOS and other operating systems which are not described
above.

If you are using some of your computer’s memory as a RAM drive, the printer
driver may not be allocated the correct amount of memory. In such a case,
reduce the size of your RAM disk, or do not use the RAM disk. Please refer to
your MS Windows documentation for further information.

Installing the printer driver

The software for your printer is provided on CD-ROM which was packed with your laser printer.
Before installing the printer driver, be sure to check the following items.

●

Is the printer connected properly to the computer?

●

Does the printer have paper?

●

Is there another GDI printer driver or Windows Printing System printer driver already
installed? If installed, change the printer port setting. For the change of the printer port
setting, see USING OTHER INSTALLED DRIVERS on page 21.

In this description, the following drive configuration is supposed. Specify proper drives depending
on the configuration of your computer.

Drive R: CD-ROM drive (installation source)

Drive C: Hard disk drive (installation destination)

«
...
4
5
6
7
8
...
»

Содержание AL-840 - B/W Laser Printer
































Отзывы:

Нет отзывов

Похожие инструкции для AL-840 - B/W Laser Printer

Бренд: Canon Страницы: 458

Бренд: Olivetti Страницы: 526

Бренд: Canon Страницы: 207

Copy Centre 518

Бренд: Xerox Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды