manualshive.com logo in svg

Sharp AL 1661CS - B/W Laser - All-in-One, Руководство по эксплуатации, Страница: 54 / 100

Поделиться
Скачать
Sharp AL 1661CS - B/W Laser - All-in-One Скачать руководство пользователя страница 54

50

CHOOSING SUITABLE MEDIA

UNSUITABLE ORIGINALS

General guidelines:

●

All clips, staples, and pins should be removed from originals before they are used. If these are not removed, they 
may damage the machine.

●

Ink, glue, and correction fluid on originals must be completely dry before using the originals with the machine.

●

Originals that are in some way dangerous to the internal mechanisms of the machine should not be used.

●

When faxing, any writing on the originals that is yellow, yellowish-green, or light blue cannot be transmitted.

The following kinds of originals should not be used:

●

Originals with a glossy coating

●

Originals with static electricity 

●

Originals with tears, folds, or curls

●

Originals that have become stuck together and cannot be easily separated

●

Originals with holes, windows, or perforations 

●

Transparency films, tracing paper, or other transparencies

●

Originals with plastic or metallic coatings

• SHARP does not accept any responsibility for the loss or damage of originals.
• It is a good idea to copy valuable originals on a flat-bed copier before using them with the machine.
• Scanning an original that is longer than 500 mm will result in a misfeed.

Note

Содержание AL 1661CS - B/W Laser - All-in-One





































































































Отзывы:

Нет отзывов