Sharp AL-1640 - B/W Laser - Copier, Руководство по обслуживанию

Страница: 20 / 25

A. Main Menu
Item
Possible
Settings
Description
Copies 1
∼
999 Sets how many copies to print.
Resolution
600dpi
∗
300dpi
Sets the printing resolution.
Smoothing
On
∗
Off
Sets whether smoothing is done or not.
This function improves the appearance
of printed documents by smoothing the
angles and curves of images. This
allows printing at a higher apparent
resolution. For example, if the printer is
set to 600dpi, resolution equivalent to
1200dpi can be achieved.
When printing image data, you may
need to select "Off" to achieve best
results.
Toner Save
On
Off
∗
Sets whether toner save mode is in
effect or not. This function prints slightly
fainter to save toner. This item is
different from the copier “toner save
mode”.
Paper
Source
Auto
∗
Tray 1
Tray 2
∗
Bypass Tray
Sets the tray used for paper feeding.
Setting to “Auto” automatically selects
the paper tray loaded with the paper of
the size specified in the “Paper Size”
item.
∗
The available settings reflect the
installed trays.
Paper Size
A3
B4
A4
∗
B5
A5
Ledger
Legal
Letter
∗
Executive
Folio
Invoice
Foolscap
COM-10
DL
C5
Sets the size of the paper where data
will be printed. If this size is different
from the paper size present in the tray,
the size set on the operation panel takes
precedence.
∗
Depending on where the printer was
purchased, the default value is either A4
or Letter.
Orientation
Portrait
∗
Landscape
Sets the page orientation for printing.
Specify “Portrait” to print the paper with
its long side (longer edge) vertical.
Specify “Landscape” to print the paper
with its long side (longer edge) horizontal.
Emulation
PCL
∗
HEX
Specifies the printer language used.
C. Interface Menu
Item Setting Choice Description
I/O Time Out
1 second
:
60 second
∗
:
999 second
Sets I/O time-out. If
no data is received
within the preset
time, print
processing is ended.
D. Test Menu
Item Description
Configuration Page Prints the configuration page.
PCL Font List Prints the PCL6 font list.
[10] CONFIGURATION REPORT
AND TEST PAGE
To test print the configuration page and font list, use the following
procedure:
1) Press the ON LINE key to switch the printer to the offline mode.
2) Press the MENU key to display the Test Menu.
3) Press the ITEM key to display the required item.
4) Press the ENTER key.
The test page prints.
DATA
ON LINE MENU ITEM ENTER
DATA
ON LINE MENU ITEM ENT
DATA
ON LINE MENU ITEM ENT
DATA
NE MENU ITEM ENTER
AL-1670
9 – 2