27
4
Special functions
USER PROGRAMS
3
Press the print (
) key. The entered program number will be steadily lit and the
currently selected parameter number for the program will blink on the right side of the
display.
4
Select the desired parameter using the right copy quantity (
) key. The entered
parameter number will blink on the right of the display.
Program
Mode
Parameters
No.
1
Auto clear time
0
e
OFF
1
e
30 sec. * 2
e
60 sec.
3
e
90 sec.
4
e
120 sec.
5
e
10 sec.
2
Preheat mode
0
e
30 sec.
1
e
60 sec. * 2
e
90 sec.
3
Auto power shut-
0
e
2 min.
* 1
e
5 min.
2
e
15 min.
off timer
3
e
30 min.
4
e
60 min.
5
e
120 min.
4
Stream feeding
0
e
OFF
* 1
e
ON
mode
5
Auto power shut-
0
e
OFF
* 1
e
ON
off mode
Factory default settings are indicated with an asterisk (*).
5
Press the print (
) key. The right-hand number in the display will be steadily lit and
the entered value will be stored.
To change the setting or to set another mode, press the clear (
) key. The
copier will return to step 2.
6
Press the light (
) or dark (
) key to return to the normal copy mode.
DISPLAYING TOTAL NUMBER OF COPIES
Use the following procedure to display the total number of copies.
1
Press the clear (
) key to reset the display to zero.
2
Press and hold down the clear (
) key for approximately 5 seconds. The total number
of copies will appear in two steps, each with three digits.
Example: Total number of copies is 1,234.
