background image

1

AH-M098E
AU-M188E

SHARP CORPORATION

MULTI SPLIT SYSTEM

ROOM AIR CONDITIONERS

INDOOR UNIT

AH-M098E

MODEL

TABLE OF CONTENTS

Page

SPECIAFICATIONS ............................................................................................................................................................. 2
EXTERNAL DIMENSIONS ................................................................................................................................................... 3
WIRING DIAGRAMS ............................................................................................................................................................ 4
ELECTRICAL PARTS .......................................................................................................................................................... 5
MICROCOMPUTER CONTROL SYSTEM .......................................................................................................................... 6
TROUBLE SHOOTING OF CONTROL CIRCUIT .............................................................................................................. 14
REFRIGERATON CYCLE .................................................................................................................................................. 19
DISASSEMBLING PROCEDURE ...................................................................................................................................... 20
TROUBLESHOOTING OF THE CONTROL CIRCUIT ......................................................................................................  21
REPLACEMENT PARTS LIST ........................................................................................................................................... 25

AU-M188E

OUTDOOR UNIT

In the interests of user-safety (Required by safety regulations in some
countries)  the set should be restored to its original condition and only
parts identical to those specified should be used.

(2 INITS)

SERVICE MANUAL

S8862AHM098E/

Содержание AH-M098E

































Отзывы: