Sharp AH-A12LCA, Руководство по эксплуатации

Страница: 8 / 52

ƽ Press this button to select LIGHT on or off
in the monitor. When the LIGHT on is
LIGHT button
LIGHT
set,the icon will be displayed and the
indicator light in the monitor will be on.
When the LIGHT off is set, the icon will
be not displayed and the indicator light in
the monitor will be off.
Names and functions of wireless remote control
ƽ
ON/OFF button
ON/OFF
Remote control
Signal transmitter
AUTO
COOL
DRY
FAN
HEAT
(only for heat pump series)
Don't drop or throw the remote control. Don't let any liquid flow into the remote control
Note: Be sure that there are no obstructions between receiver and remote control.
Medium fan
and put the remote control directly under the sunlight or any place where is very hot.
ƽ Press this button, Auto, Cool,Dry, Fan,
mode can be selected circularly.
MODE button
MODE
Auto mode is default while power on.
Under Auto mode,the temperature will not
be displayed.
ƽ
Press this button, Sleep On and Sleep
Off can be selected. After powered on,Sleep
SLEEP button
SLEEP
Off is defaulted. After the unit is turned
off, the Sleep function is cancelled. After
Sleep function set up, the signal of Sleep
will display. In this mode, the time of timer
can be adjusted. Under Fan and Auto
modes, this function is not available.
ƽ
Press this button, Auto, Low, Medium, High
speed can be circularly selected. After
FAN button
FAN
powered on,Auto fan speed is default.
Under DRY mode, Low fan speed
only can be set up.
Low fan
High fan
ƽ
Press this button, the clock can be set up,
signal blink and display.Within 5
CLOCK button
CLOCK
seconds, the value can be adjusted by
pr or - button, if continuously
press this button for 2 seconds or above,
in every 0.5 seconds, the value on ten place
of Minute will be increased by 1. During blinking,
repress the Clock button, signal will be
constantly displayed and it denotes the
setting succeeded. After powered on, 12:00
is defaulted to display and signal will
be displayed. If there is no signal be
value is Clock value, otherwise is Timer value.
displayed that denotes the current time
Operation of wireless remote control
Press this button, the unit will be turned on,
press it once more, the unit will be turned
off. When turning on or turning off the unit,
the Timer, Sleep function will be cancelled,
but the presetting time is still remained.