-42
You can adjust the projector’s picture to your preferences using the “Picture” menu.
Picture Adjustment (“Picture” menu)
Adjusting the Image
Menu operation
Page 38
Note
•
First select “Memory 1-5” or “Memory OFF”
when you want to save the “Picture” menu set-
tings. See page
44
for details.
Example: “Picture” menu screen for
INPUT 1 mode
Description of Adjustment Items
Note
•
“Color”, “Tint” and “Sharp” do not appear for
RGB input in INPUT 5 mode.
•
To reset all adjustment items, select “Reset” on
the “Picture” menu screen and press
.
•
“Tint” cannot be used with PAL, SECAM, PAL-
M, PAL-N or PAL-60.
•
“Color”, “Tint” and “Sharp” cannot be used in
the DIGITAL mode.
Selectable items
Contrast
Bright
Color
Tint
Sharp
Red
Blue
Press
\
For less contrast
For less brightness
For less color intensity
For making skin tones purplish
For less sharpness
For weaker red
For weaker blue
Press
|
For more contrast
For more brightness
For more color intensity
For making skin tones greenish
For more sharpness
For stronger red
For stronger blue
Adjusting the Color Temperature
This function allows for selecting the desired
color temperature. With the lower value selected,
the projected image becomes warmer, reddish
and incandescent-like while with the higher
value, the image becomes cooler, bluish and fluo-
rescent-like.
Menu operation
Page 40
Example: “Picture” menu screen for
INPUT 1 mode
Description of Color Temperature Settings
“CLR Temp” is fine adjusted by following the procedure below.
1
Select “CLR Temp” in the “Picture”
menu on the menu screen and
press
.
•
A single menu bar of “CLR Temp” is displayed.
2
Press
'
'
'
'
'
or
"
"
"
"
"
to fine adjust the
color temperature.
•
With the lower value selected, the projected
image becomes magenta-tinged. With the
higher value selected, the projected image
becomes green-tinged.
•
Pressing
\
or
|
changes the value of the
color temperature in the sub menu.
Note
•
Values on “CLR Temp” are only for general standard purposes.
CLR Temp
5500K
6500K
7500K
8500K
9300K
10500K
Description
The less the value is set to, the warmer,
reddish, incandescent-like the image becomes.
The more the value is set to, the cooler,
bluish, fluorescent-like the image becomes.
XV-Z2000U_E_P38_46.p65
04.10.13, 0:18 PM
42