Sharp AF-W12CME, Руководство по эксплуатации

Страница: 9 / 20

9
1
Press the TIMER ON ( ) button.
• The time setting will change as you press the
button as follows.
MODE
SAVE MODE
FAN 1H
SWING CANCEL
TEMP.
TEMP.
FAN TIMER
0.5H 1.0H 1.5H 10H 11H 12H
The unit will turn on automatically according to your setting.
Timer duration can be set from minimum 0.5 hours (30 minutes) to maximum 12
hours.
Up to 9.5 hours, you can set by 0.5 hours (30 minutes) increments and from 10 to 12
hours, by 1 hour increment.
TIMER ON
1
NOTES FOR TIMER SETTING AND OPERATION
• The latest time setting will be memorized and will appear on the remote control display
the next time you set the TIMER OFF or TIMER ON.
• TIMER OFF and TIMER ON can not be set together.
The latest set TIMER will be active.
• When ONE-HOUR OFF TIMER is set, TIMER OFF and TIMER ON will not be available.
• When ONE-HOUR OFF TIMER is set during TIMER OFF or TIMER ON duration, the
TIMER ON or TIMER OFF will be cancelled.
Hold the button pressed down for fast setting.
• The yellow TIMER lamp on the unit will light up.
• The unit will generate a beep when it receives
the signal.
• The time setting will count down to show re-
maining time.
Select the mode, temperature and fan speed set-
ting as desired.
• When the temperature is set with the TIMER
ON, the temperature will show in the display for
5 seconds and then return to the time display.
• If you do not change the setting, the unit will
operate with the latest setting.
• The unit will turn on prior to the set time to allow
the room to reach the desired temperature by
the programmed time. (Awaking function)
Example : When you wish the
room temperature
to be as desired
6.5 hours later.