background image

16

Open the battery compartment
cover.

Insert and slide the batteries into
the compartment, making sure
the       and       polarities are
properly aligned.

Close the cover.

HOW TO OPERATE

INSTALLING BATTERIES

Use two size-AA (R6) batteries.

Battery compartment cover

NOTES:

• The battery life is approximately one year with normal use.
• When you replace the batteries, always use two new ones of the same type.
• If the remote control does not operate normally after replacing the batteries, take out the

batteries and replace them again after 30 seconds.

• If you will not be using the unit for a long time, remove the batteries from the remote control.

HOW TO USE THE REMOTE CONTROL

Point the remote control towards the unit's re-
ceiver window and press the desired button. A
beep will sound when the unit receives the signal.

• Make sure no objects, such as curtains, block the

receiver window.

• The remote control operates from up to 20 feet (6

meters) away.

• The beep will also sound when each pad on the

control panel is touched.

CAUTION:

• Do not expose the receiver window to direct sunlight. This can adversely affect its operation.  In

such case, close the curtains to block the sunlight.

• Use of a fluorescent lamp in the same room may interfere with the transmission of the signal.
• The unit may be affected by signals emitted from the remote control of a television, VCR or other

equipment used in the same room.

• Do not leave the remote control exposed to direct sunlight or near a heater.  Protect the  remote

control from moisture and shock which can discolor or damage it.

2

1

3

USING THE REMOTE CONTROL

Содержание AF-S50EX





















Отзывы: