Section
2
Electronic Control
2
-3
TIMER BUTTON
For Delay Stop, the unit must be in the ON position.
For Delay Start, the unit must be in the OFF position.
When TIMER Mode is selected the LED will illumuinate
above the botton.
To adjust timer setting, tap or hold the UP arrow (^) or
DOWN arrow (v) to change the delay time by .5 hour
increments up to 10 hours, then by 1 hour increments
up to 24 hours. The control will count down the timer
remaining until start (8, 7.5, 7, etc.). The Delay Start
mode automatically selects cooling with maximum Fan
Speed. The temperature maintained will be the same
as previously set. To change the set temperature,
temperature is indicated on the display. After 5 seconds,
the control will automatically change the display back to
the hours remaining until the unit will start/stop. Turning
Start/Stop function. The delay Start/Stop feature will
work until the unit either starts or stops. Once this has
happened then the above steps have to be repeated
again.
AUTO COOL BUTTON
Note: Fan starts at High Speed and sdjusts to a slower
speed as the room temperature dictates. For example
if the room does not get too warm, it will stay at the
slowest speed. If the room temperature rises quickly,
such as a door being opened, it will automatically go to
the highest speed. The fan speeds will re-adjust back
to the slowest speed as the room returns to the original
set temperature. Press either the fan slower (v) or fan
faster button (^) to adjust the fan speed manually.
FAHRENHEIT /CELSIUS
The control is capable of displaying temperature in
degrees Fahrenheit or degrees Celsius. To convert from
one to the other, press and hold the UP and DOWN
Temperature Selection Buttons at the same time for 3
seconds.
FAULT CODES
the ambient thermistor located in the remote control.
