background image

8

IMPORTANT: Points to keep in mind when using your air conditioner.

Install the air conditioner by following the installation instructions given in the
previous section of this manua

l.

Make sure the unit is the correct capacity for the area you want to cool.

Do not modify any part of this product.

Do not insert objects into any part of the unit.

Push the AC power plug securely into the receptacle and make sure it is not loose.

Use power circuit with a proper voltage rating.

Use a three-pronged grounded electrical outlet rated 125V,
60Hz, 15 amp or more, AC only as shown on right.
Use of an improper voltage rating power circuit can result in
damage to the unit and possibly fire.

Always use a fuse with the proper amp rating

.

Do not, under any circumstances, use wire, pins or other objects in place of the proper fuse.

Use of extension cords of any kind is not recommende

d.

If you still elect to use an extension cord, it is absolutely necessary that it be a UL Listed 3-wire
grounding type appliance extension cord rated 125 Volts, 15 amp or more.

Ventilate the room periodically during use, especially if using gas appliance

s.

PRECAUTIONS

3-Pronged receptacle

3-Pronged plug

Grounding prong

Grounded

receptacle box

Grounding

adapter

Grounded

receptacle box

Screw

Tab for grounding screw

Grounding

wire

WARNING: Improper use of the grounding plug can result in the risk of electric
shock.

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the
risk of electric shock by providing an escape wire for the electric current.
This appliance is equipped with a cord having a grounding wire with a grounding plug.
The plug must be plugged into an outlet that is properly installed and grounded.

WARNING: Do not under any circumstances cut or remove the round grounding prong
from this plug.

If it is necessary to use an extension cord, use only a UL Listed 3-wire extension cord that has a 3-blade
grounding plug, and a 3-slot receptacle that will accept  the  plug  on  the  appliance.
The marked rating of the extension cord should be AC 125 Volt, 15 Amp or more.
Consult a qualified electrician or serviceman if the grounding  instructions  are  not  completely
understood, or if doubt exists as to whether the appliance is properly grounded.
If a grounding adapter is used, make sure the receptacle box is fully grounded.

Two-Pole, 3-wire Grounding
Receptacle 15 Amps. 125V.

CAUTION FOR USE

GROUNDING INSTRUCTIONS

Содержание AF-R100EX





















Отзывы: