Use to activate automatic louvre movement during LOW COOL (
), MED COOL ( ) and HIGH
COOL (
).Adjust the louvres to change the direction of air flow for uniform and efficient cooling of the
room. Set the AUTO SWING switch (
) ON (
), and the Left/Right air flow adjustment louvres will
swing continuously to provide better circulation of cool air. The louvres will stop at the position when
the switch is turned off. Also use the switch to adjust the Left/Right air flow adjustment louvres to the
desired position. Never attempt to move the Left/Right air flow adjustment louvres manually, or manu-
ally force the louvre movement to stop during swing operation.The AUTO SWING switch (
) will not
activate the louvres when the SELECTOR KNOB is set to FAN ONLY (
).
Use to adjust the desired room temperature setting.
The air conditioner will automatically maintain the room temperature according to the THERMOSTAT
setting. Turning the knob clockwise will lower room temperature. You need to experiment to find out
which setting suits you most.
If air in your room is stale, set the VENTILATION lever to the RIGHT (OPEN) position. This will remove
stale air from the room. The VENTILATION lever should normally be kept in the LEFT (CLOSED)
position during cooling operation for maximum cooling effect.
Move the Up/Down air flow adjustment louvres with your fingers. Do not adjust these louvres ex-
tremely downward during LOW COOL (
), MED COOL ( ) and HIGH COOL (
) for a long time.
Condensation may form on the louvres.
AUTO SWING SWITCH
MODES OF OPERATION
E-7
VENTILATION LEVER
THERMOSTAT KNOB
Left/Right air flow
adjustment louvres
(Auto Swing)
Ventilation lever
Up/Down air flow
adjustment louvres
UP/DOWN AIR FLOW ADJUSTMENT
CLOSED
OPEN