Sharp 32N-S500, Руководство по эксплуатации

Страница: 6 / 40

6
1. A 75 ohm system is generally a round cable with F-type connector that can easily be
attached to a terminal without tools. The F-type connector should be finger tightened
only.
2. A 300 ohm system is a flat “twin-lead” cable that can be attached to a 75 ohm terminal
through a 300-75 ohm ADAPTOR (not supplied).
Antennas
• The antenna requirements for good color television reception are more important than those for black & white television reception. For this
reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connections that are provided with the various antenna systems:
Antenna Connections
OUTDOOR ANTENNA CONNECTION
• Use one of the following two diagrams if you connect an outdoor antenna.
A: Using a VHF/UHF combination outdoor antenna.
B: Using separate VHF and/or UHF outdoor antenna.
• Connect an outdoor antenna cable lead-in to the COAXIAL CABLE CONNECTOR on the rear of the TV set.
A. Combination VHF/UHF Antennas B. Separate VHF/UHF Antenna
CABLE TV (CATV) CONNECTION
• A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm coaxial cable to the set, screw the 75
ohm cable to the COAXIAL CABLE CONNECTOR.
• Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay channels are scrambled, a cable TV
converter/descrambler is generally provided to the subscriber by the cable TV company. This converter/descrambler is necessary for
normal viewing of the scrambled channels. (Set your TV on channel 3 or 4. Typically one of these channels is used. If this is unknown,
consult your cable TV company.) For more specific instructions on installing cable TV, consult your cable TV company. One possible
method of utilizing the converter/descrambler provided by your cable TV company is explained below.
Please note: RF switch equipped with position A/B (not provided) is required.
“A” position on the RF switch (not supplied) : You can view all unscrambled channels using the TV’s channel keys.
“B” position on the RF switch (not supplied) : You can view the scrambled channels via the converter/descrambler using the converter’s
channel keys.
• Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that might be required.
F-type connector
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)
Cable TV converter/
descrambler
(not supplied)
Two-set
signal
splitter
(not
supplied)
Cable TV Line
RF switch (not supplied)
OUT
IN
COMPONENT-IN
Y
PB L
L
R
AUDIO
VIDEO
IN 1 IN 3
R PR
(CB)
(CR)
IN 1 IN 3
S-VIDEO
LINE
OUT LINE IN
Either the S-VIDEO or t he VIDEO terminal can be used,
but the S-VIDEO overrides the VIDEO terminal.
VCR Pus+, C3, AllSet, PlusCode and GUIDE Plus+ are trademarks
of Gemstar Development Corporation. The VCR Plus+ and GUIDE
Plus+ systems are manufactured under license from Gemstar
Development Corporation and VCR Index Systems B.V., respectively.
'1990 GDC ' 1997 ISI 5,307,173 and 5,335,079
ANT/ CABLE
75
Ω
300-ohm
twin-lead
VHF/UHF ANTENNA
REAR OF TV
300/75-ohm
ADAPTOR
(not supplied)
or
ANT/
CABLE
75
Ω
75-ohm
coaxial
cable
VHF/UHF
ANTENNA
COMPONENT-IN
Y
PB L L
R
AUDIO
VIDEO
IN 1 IN 3
R PR
(CB)
(CR)
IN 1 IN 3
S-VIDEO
LINE
OUT LINE IN
Either the S-VIDEO or t he VIDEO terminal can be used,
but the S-VIDEO overrides the VIDEO terminal.
VCR Pus+, C3, AllSet, PlusCode and GUIDE Plus+ are trademarks
of Gemstar Development Corporation. The VCR Plus+ and GUIDE
Plus+ systems are manufactured under license from Gemstar
Development Corporation and VCR Index Systems B.V., respectively.
©1990 GDC © 1997 ISI 5,307,173 and 5,335,079
ANT/
CABLE 75 Ω
300-ohm
twin-lead
300-ohm
twin-lead
75-ohm coaxial
cable
IN OUT
VHF
ANTENNA UHF
ANTENNA
COMBINER
(not supplied)
or
REAR OF TV
ANT/
CABLE
75
Ω
OUT
A
IN
B
NOTE: