Sharp 29LF-92EC, Руководство по эксплуатации

Страница: 15 / 43

- 14 -
Note : Channel Search Tuning Mode uses a channel table.
The channels and stations at the table may vary from table to
table and from country to country. Each channel has an ex-
act frequency on the table.
• Frequency Search Tuning Mode does not use a channel
table and it is slower than Channel Search Tuning Mode.
• Channel Search Tuning Mode is recommended for the
countries which uses standard channel table.
• Frequency Search Tuning Mode recommended for the
countries which uses non-standard channel table.
Program Menu
You can use the Program menu to delete a channel, to
change the programme number of a channel, to give a chan-
nel name to a channel, and to start the A.P.S (AUTOSTORE)
function.
• To enter
PROGRAM menu directly, press the “ ” button,
or
• Press “ M ” button to display the main menu.
• Press “ ” or “ ” button to select “ PROGRAM ” item, then
“ ” or “ ” button to display the “ PROGRAM ” menu.
$8726725(
,16(57
'(/(7(
1$0(
&
&
&
&
&
&
To choose a channel in the PROGRAM menu:
• Press “ ” / “ ”/ “ ” / “ ” button. The programme number
that you choose is high-lighted in the PROGRAM menu and
you can view the picture of that channel.
Caution:
Using the DELETE or INSERT function it is possible to re-
write the current channel list in the PROGRAM menu. This
can cause other channels to be changed if they were former-
ly in locations affected by this function.
To give a channel name (NAME):
1. Choose the channel you want to give a channel name.
2. Press the RED button to enter the NAME mode.
3. Press “ ” or “ ” button to choose the position, and press
“ ” or “ ” button to choose each character of channel
name.
4. Press the RED button to store the channel name.
• To cancel the NAME mode, press the BLUE button.
To delete a channel (DELETE):
1. Choose the channel you want to delete.
2. Press the YELLOW button to enter the DELETE mode.
3. Press the YELLOW button to delete it.
• To cancel this DELETE mode, press the BLUE button.
To change the programme number of a channel
(INSERT):
1. Choose the channel you want to change the programme
number.
2. Press the GREEN button to enter the INSERT mode.
3. Press “ ” / “ ”/ “ ” / “ ” button to choose new
programme number.
4. Press the GREEN button to insert the channel to the cho-
sen programme number.
• To cancel this INSERT mode, press the BLUE button.
To start A.P.S (AUTOSTORE)
A.P.S. automatically programmes the received channels in
your TV’s programme numbers.
1. Press the BLUE button to enter the AUTOSTORE mode.
A warning message appears.
$// 35(6725(' 352*5$00(6
:,// %( (5$6('
&28175<
781,1*02'(
&217,18(
79&$1&(/
(
&+$11(/
• To cancel the AUTOSTORE mode, press the “ ” but-
ton.
2. Press “ ” or “ ” button to choose the “ COUNTRY ”, then
press “ ” or “ ” button the choose country you are now
located.
3. By pressing the up and down buttons, come to the Tuning
Mode item and select the mode at which your TV will run
the APS.
4. Press “ ” or “ ” button to choose the “ CONTINUE ”, then
press “ ” button to start A.P.S. The following message
appears.
$36 ,6 5811,1*
3/($6( :$,7
79 &$1&(/
• To cancel the A.P.S. , press the “ ” button.
5. After A.P.S. is finalized, the PROGRAM menu appears
again.